Rear Camber Angle

[starider]

I would lke to know the rear Camber Angle please. Many thanks in anticipation.

[pcous]

Hi starider,

You've not said which model, but if it's helpful here are the wheel alignment figures I found for our 2002-07 Alphard:

MALAYSIA: TOYOTA ALPHARD MPV(2002 - 2007)
Parameter.         MIN MAX 
Front Total Toe -0.11 0.11
FL Toe -0.06 0.06
FR Toe -0.06 0.06
FL Camber -0.41 1.25
FR Camber -0.41 1.25
Rear Total Toe 0.1 0.26
RL Toe 0.05 0.13
RR Toe 0.05 0.13
RL Camber -1.5 -0.58
RR Camber -1.5 -0.58
Left Caster 2.08 3.58
Right Caster 2.08 3.58

 

Regards

pcous

[Rojie]

Very useful information, pcous.

 

Thank you.

 

Any of us experiencing uneven tyre wear may find a solution in this data.

It may help tyre fitters too, who often want to tweak the suspension geometry !

Or to get it corrected after they did !

[Chris.ac]

For the 20 series, I have this:

[Rojie]

3 hours ago, Chris.ac said:

For the 20 series, I have this:

Chris, yet more really helpful technical data from you. Thanks

[Chris.ac]

After any adjustments to the tracking, make sure to disconnect the battery for a few seconds in order to reset the VSC (skid control) computer

[pcous]

Hi all,

Correction - I've found an alternative set of wheel alignment figures for 2002-07 Alphard, which are different from those I posted in Oct 2021 (they were Malaysian and I can't see them on the website any longer....):

The link is:

http://www.jltechno.com/en/alignment_specs.php?brand=Toyota&ModelName=Alphard/Vellfire:H10%C2%A0Series:MNH10W&ModelID=610365

and jltechno also publish data for other Alphard models: http://www.jltechno.com/en/alignment-data-lookup/40016/Toyota.html

 

Alignment Data Lookup->Toyota->Alphard/Vellfire:H10 Series:MNH10W

Alignment Specs

Parameter	MIN spec	Standard spec	MAX spec
Front Total Toe	-0.17		0.17
FL Toe	-0.09		0.09
FR Toe	-0.09		0.09
FL Camber	-1.42		0.08
FR Camber	-1.42		0.08
Rear Total Toe	-0.25		0.25
RL Toe	-0.13		0.13
RR Toe	-0.13		0.13
RL Camber	-2		-1
RR Camber	-2		-1
Left Caster	1.67		3.17
Right Caster	1.67		3.17
Left SAI	N/A		N/A
Right SAI	0		0

There are significant differences, so if anyone relied on the earlier figures for alignment, can I suggest you check them again?

Regards,

Pcous

[pcous]

Hi all,

 

Correction - I've been given yet another set of wheel alignment figures for 2002-07 Alphard, which are different from those I posted earlier- these came from our wheel alignment specialist, who searched Japanese data. They're a more extensive set of figures, but for some values the tolerance range is narrower than the figures above:

 

Toyota->Alphard H10 Series:MNH10W

Wheel Alignment Specification

Parameter	Minimum		Maximum
Front Total Toe	-0.10		+0.10
FL Toe	-0.05		+0.05
FR Toe	-0.05		+0.05
FL Camber	-1.25		+0.05
FR Camber	-1.25		+0.05
FL Caster	+1.40		+3.10
FR Caster	+1.40		+3.10
FL SAI	+10.05		+11.35
FR SAI	+10.05		+11.35
FL Included Angle FR Included Angle Front Cross Camber	+8.40 +8.40 -0.45		+11.40 +11.40 +0.45
Front Cross Caster	-0.45		+0.45
Rear Total Toe	-0.15		+0.15
RL Toe	-0.08		+0.08
RR Toe	-0.08		+0.08
RL Camber	-2.0		-1.0
RR Camber	-2.0		-1.0

 

 

Regards,

pcous