Shane Posted December 17, 2021 Posted December 17, 2021 Hi everyone, can someone give me some performance figures for my car car that's on the way from japan . Its a 2010 velfire..3 5 platinum selection...it seems slightly difficult to get realistic speed and fuel figures. Thanks Shane
Chris.ac Posted December 18, 2021 Posted December 18, 2021 Japanese domestic market cars are speed limited to 112mph (180kph) - it will comfortably get to that speed at about 3500rpm Its maximum HP will be 280 - again, this is based on an agreement between the Japanese car manufacturers 'anti competition'. My 3.5l shows consumption each minute, and averages between 8km/l and 12km/l (22 - 33mpg) occasionally I blip the accelerator when an audi or bmw is trying to attach itself to my rear, and consumption drops to around 5km/l (14mpg!) So, I would honestly say, as long as you drive it sensibly, (my driving is a mix of city and rural), you should get at least 28-30mpg
Chris.ac Posted December 18, 2021 Posted December 18, 2021 Just now, Chris.ac said: Japanese domestic market cars are speed limited to 112mph (180kph) - it will comfortably get to that speed at about 3500rpm Its maximum HP will be 280 - again, this is based on an agreement between the Japanese car manufacturers 'anti competition'. My 3.5l shows consumption each minute, and averages between 8km/l and 12km/l (22 - 33mpg) occasionally I blip the accelerator when an audi or bmw is trying to attach itself to my rear, and consumption drops to around 5km/l (14mpg!) So, I would honestly say, as long as you drive it sensibly, (my driving is a mix of city and rural), you should get at least 28-30mpg My vehicle is a 2010 Alphard - same mechanics and tuning - If you really want more oomph (doesnt need it, will do 0-62mph in 7 seconds) you can get it stage 1 unlocked, adds about 15% moar powah
Rojie Posted December 18, 2021 Posted December 18, 2021 1 hour ago, Chris.ac said: My vehicle is a 2010 Alphard - same mechanics and tuning - If you really want more oomph (doesnt need it, will do 0-62mph in 7 seconds) you can get it stage 1 unlocked, adds about 15% moar powah Hi Shane, I have the earlier 3 litre V6 with a 5 speed Yours will have a 6 speed. These engines have plenty of torque. I doubt you will be disappointed. They are very refined, and quiet Hi Chris, you have my interest again? What is the cost to unlock Stage 1, Is it a simple remap ? Does it improve torque ? I'm just curious.
Chris.ac Posted December 18, 2021 Posted December 18, 2021 https://puretuning.net/en/chiptuning-files/toyota/alphard/3-0i-v6-220hp They are selling the firmwares - at 85euro for stage 1 - now there are several remappers in the south west, 2 of which I see are in/near exeter, I imagine for stage 1 they just connect up to the ecu with a re-programmer and upload the new ready to roll firmware, stage 2/3 are when you start taking up to 2 days to do roller tests and modify other things like the egr and maf - you can even have it so it makes those boyracer pops and bangs from the exhaust. I image you are looking at a couple hundred, I dont think its worth the hassle.
Shane Posted December 18, 2021 Author Posted December 18, 2021 7 hours ago, Chris.ac said: My vehicle is a 2010 Alphard - same mechanics and tuning - If you really want more oomph (doesnt need it, will do 0-62mph in 7 seconds) you can get it stage 1 unlocked, adds about 15% moar powah 0-60 in 7 secs ??..really ?? That's quick for a big lump . I didn't expect that tbh , thanks for the info gents
Rojie Posted December 18, 2021 Posted December 18, 2021 18 hours ago, Chris.ac said: https://puretuning.net/en/chiptuning-files/toyota/alphard/3-0i-v6-220hp They are selling the firmwares - at 85euro for stage 1 - now there are several remappers in the south west, 2 of which I see are in/near exeter, I imagine for stage 1 they just connect up to the ecu with a re-programmer and upload the new ready to roll firmware, stage 2/3 are when you start taking up to 2 days to do roller tests and modify other things like the egr and maf - you can even have it so it makes those boyracer pops and bangs from the exhaust. I image you are looking at a couple hundred, I dont think its worth the hassle. Thanks Chris, We must meet up in the New Year. I don't want, or need, anyone messing with my MAF, or EGR. I don't see myself as a 70 year old boy racer, listening to (and becoming annoyed by) turbo overboost relief valve crackle. It is very unusual, but if that type of mood overwhelms me I have a supercharged 4.2 V8 sitting outside just waiting to burble and whine. If I boot my Black Cat she flies ! Best regards Roger 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now