Steveshotgun Posted September 10, 2022 Posted September 10, 2022 Sliding door will not close fully. It slides to the point where it turns in, stops and reopens. All clean and lubricated, no obvious damage. All rails and wheels seem good. Will push shut. Do the motor get tired. Any thoughts or help welcome
Allrightscud Posted March 18, 2023 Posted March 18, 2023 I have the same issue, the door closes tight but afte a second eleases and the door stays closed on the safety latch. I've cleaned the trims, sliders and checked the limit switches etc. Dd you manage to get a resolve for your issue?
Rojie Posted March 18, 2023 Posted March 18, 2023 Hello Tom, Do you encounter the same problem if the engine is running ? If so, charge your battery fully. Is it both doors ? I am wondering if you may have a problem with the obstruction sensors
Tessi Triadi Posted April 12, 2023 Posted April 12, 2023 If I may recall, my cousin has ANH10 2007, he serviced the sliding door, and found out that there is a small looks like dynamo, he changed it at resolved. I will try to ask him if there is a picture about it.
atlanticcobra2023 Posted April 24, 2023 Posted April 24, 2023 (edited) Hi all, I am looking for the right hand sliding door roller bracket. Looked online but suppliers are mostly Japan based. was wondering if there is anywhere in the UK where I could source one from. 😁 oops forgot to mention its the top one Edited April 24, 2023 by atlanticcobra2023 added info
AlphardSeeker Posted July 5, 2023 Posted July 5, 2023 Hi, Just wondering if there was any resolution to this. We have the same issue. thanks!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now