Fault cleared with scan tool but recently it has come back.

could  a blown fuse be responsible ? 

It's speed sensor on the transmission there is 2 both the same part no. If you pm me your vin no. I will confirm for you and let you know best place to buy 

ANH10 -0174826 

 

Can you tell  me the location of the parts

Hi Picasso. 

Would this be OK  .

https://www.ebay.co.uk/itm/195321318366?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=EgGS6wAyTp-&sssrc=2349624&ssuid=M3fpVeoHSGq&var=&widget_ver=artemis&media=COPY

Hello that's wrong part no. Your part no. Is 8941324010 they located on the transmission 2 same part no. My advice is replace both at same time 

Just now, Picasso said:

Hello that's wrong part no. Your part no. Is 8941324010 they located on the transmission 2 same part no. My advice is replace both at same time 

Thanks where will I get them from ?

Just put part no . In ebay they cheap to buy 

10 minutes ago, Picasso said:

Just put part no . In ebay they cheap to buy 

😇

19 hours ago, Picasso said:

It's speed sensor on the transmission there is 2 both the same part no. If you pm me your vin no. I will confirm for you and let you know best place to buy 

Hi Picasso. 

Sorry to be a pest .

Could you tell  me where abouts the sensors are or a picture 

It's OK here is a picture have circled in red the sensors picture not great 

Hi Picasso ,I still have the problem  after fitting a new sensor its still showing the same fault  no signal. on the scan tool

I put a tester on the connections with ignition on and there is no voltage ? any ideas wold be helpful