Hi Everyone 

wonder if anyone can help me. 
I have just purchased a 2008 Vellfire 2.4 series 2. The heating controller is not working at all. Doesn’t illuminate, clocks not working and neither are the hazard warning lights. 
I would really appreciate it if anyone has any advice or similar experiences. 
I had the connections to the controller checked and chap said there was no power coming through and so checked fuses and they were ok too?

 

2nd opinion required. 

The heater controls are connected via a single plug, which is actually partly connected to the canbus.

 

Which fuses did they check? There are 4 fuse boxes in total in the 20 series.

 

It is possible the controller is faulty, but not very likely. 

Wiring schematic here. 

http://zatonevkredit.ru/schemes/path/90a45b34bb471b85daf79431205dd16c7c467f0244212cbdcef32ace4c2ad21607a3b456872cdb27d1c6c7d878f8bbac80f22ace926c5fb60cc03873eb853f43b292ad84033de4642ed8a57de2705d3fe24eba5b1664164de8eb2ae1c76bb48e48b9f83637302aff0a7d104443a3b8c7140ece69a84d4f947b419547cbb678ce2215869d

11 minutes ago, Chris.ac said:

Wiring schematic here. 

http://zatonevkredit.ru/schemes/path/90a45b34bb471b85daf79431205dd16c7c467f0244212cbdcef32ace4c2ad21607a3b456872cdb27d1c6c7d878f8bbac80f22ace926c5fb60cc03873eb853f43b292ad84033de4642ed8a57de2705d3fe24eba5b1664164de8eb2ae1c76bb48e48b9f83637302aff0a7d104443a3b8c7140ece69a84d4f947b419547cbb678ce2215869d

Hi Chris 

thanks for your reply. 
any idea where these fuses are located. 
as far as I am aware there are 4 fuse boxes,  2 in the engine compartment and 1 each either side under dash.