how do you remove the gearbox control module

4 hours ago, jamesdee3 said:

how do you remove the gearbox control module

 

Hello Jim,

 

Welcome to the Forum

Hi Roger, I would like to know if the gearbox control module can be 

removed from the gearbox with out removing the gear box, its a 2009 

Vellfire 3.5 engine, thanks Jim

6 hours ago, jamesdee3 said:

Hi Roger, I would like to know if the gearbox control module can be 

removed from the gearbox with out removing the gear box, its a 2009 

Vellfire 3.5 engine, thanks Jim

 

Hi Jim,

 

I have absoutely no idea.

 

I was tempted to answer your original question by "Very carefully".

Inherently totally unhelpful though.

 

My guess is that Chris.ac and/or Picasso are the most likely to be able to answer your query.

 

Please be patient to give all members time to rsepond

Hello Jim what's your reg no. Pm me it if you want to I have access to the lookup system 

my reg is KVO1E thanks Jim

hi have atatched a picture if its this one you can do it by droping the transmission sump oe no. is   3541033171 

thanks for the information,

I had a look at it today, and yes you can remove the gearbox control unit without removal of the gearbox,

it was quite easy, first remove battery and box remove two further brackets, then you can see the control 

unit, undo the two securing bolts pull up the unit disconnect the plug and that's it, hope this post will be useful

for the forum