Seat Rail / Runner Removal - 20 Series

[T8by]

Hi there,

 

I've seen quite a lot of information online regarding removing the seat runners from their tracks on the 10 series, but not a lot on the 20 series. Some technical guidelines I found online suggested that they needed to be un-bolted from underneath the vehicle which requires removing the fuel tank. Has anyone found a way to remove the seat runners without having to un-bolt from the underside?

 

Thanks,

Toby

[Rojie]

  On 4/5/2025 at 10:17 AM, T8by said:

Hi there,

 

I've seen quite a lot of information online regarding removing the seat runners from their tracks on the 10 series, but not a lot on the 20 series. Some technical guidelines I found online suggested that they needed to be un-bolted from underneath the vehicle which requires removing the fuel tank. Has anyone found a way to remove the seat runners without having to un-bolt from the underside?

 

Thanks,

Toby

Expand  

 

Your profile is set to Gen 1, pre-facelift.

Is that what you have ?

 

I am not aware whether the fuel tank needs to be removed, or not; the rails are fastened from underneath the chassis floor on Gen 2.

 

As you say, Gen 1 are removed from above.

[T8by]

  On 4/5/2025 at 7:25 PM, Rojie said:

 

Your profile is set to Gen 1, pre-facelift.

Is that what you have ?

 

I am not aware whether the fuel tank needs to be removed, or not; the rails are fastened from underneath the chassis floor on Gen 2.

 

As you say, Gen are removed from above.

Expand  

Thanks for your reply.

 

I've updated my profile as I made my account before becoming an owner!

 

It's definitely a gen 2!