Hi all

 

I'm trying to sort out a MPH to KPH chip on an Alphard but don't have the original wiring instructions. For the chip in the photo does the yellow wire attach to the wires coming from the loom, or the wire going into the speedo? 

 

Many thanks 

Simon where is this chip located because that looks like the Iva fog light switch the Speedo chip is behind the Speedo clock and the chip is called a ckun09 I will email you full fitting instructions tomorrow 

Simon check this link see what I mean by this chip looking like the fog light switch      https://www.autojapspares.co.uk/import-fog-light-switch-control-unit--universal-rocker-switch-for-ava-regs-34421-p.asp

Thanks Picasso. That's interesting, that chip is behind the instrument cluster and wired into the plug going into the speedo. 

Hi Abbot, I had a problem with my speedo chip and eventually removed it, installed a GPS digital mph speed instead and reinstated the kph speedo. 
However, I took some photos of the wiring just in case I needed to replace the chip which I’ve attached in case useful for you. 

Speedo chips should never have bullet connectors or wire connectors they should all be soldered