stad34

On 12/15/2024 at 2:57 PM, Voodoo101 said:

New high beams sorted. Out with the ballast and new LEDs wired direct. Work, fit perfect and gives me less connections to worry about.

 

https://www.amazon.co.uk/dp/B0D7VCBCBK?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Have you still got these fitted and how are they working out for you, any problems?

Just pop a wheel off and check 👍🏻

Removing the Toyota badge is no different to any other vehicle, sounds like an excuse so they can just rip the old one off!

Not the sort of shop I would be using 😉

I have Brembo discs and pads on my 3.5 and whilst they are okay, the set up is not that good but it’s more about the size of the discs and calipers as they are very small!

Performance fluid and stainless brake lines would help but not enough alone if you need more braking performance.

I am looking at what physical upgrades could be done using other Toyota fitments as something like the 4 pot calipers and discs from the ST205 Celica would be a great upgrade…

I have seen an AP racing upgrade but that was over 4k so not really in budget unless you are going down a Trackday route!

6 minutes ago, smurf said:

On a gen 1 the fuel tank is 70 litres.  I think I read recently that when the low fuel light comes on there is 11 litres left.

 

If you are finding a significant difference to these figures it is worth getting under the car and looking at the tank. It isn't unheard for cars to be lifted with a fork truck in the docks and this can dent the fuel tank. 

It’s a 20 series page, not 10 series 😉
Also unlikely to be dented as sure they are plastic tanks on these

On 1/21/2025 at 9:12 PM, tino7770 said:

Pic of my Vellfire

 

Used TOYOTA VELLFIRE in Cumbernauld, Glasgow | Drive Japan

Snap!
 

I thought it was a 50 litre tank based on how much I can get in there. It would be so much better if it was an 80l 👍