Jump to content
Check your Alphards past history in Japan in detail with CarVX ×

Picasso

Moderators
  • Posts

    1,014
  • Joined

  • Last visited

  • Days Won

    66

Everything posted by Picasso

  1. From experience try cleaning it if works for a bit buy a genuine one I put aftermarket one on it ran like a bag off bolts genuine run like a dream
  2. phil sorry yes you got the correct fuel sensor if i was you i would not bother cleaning the maf sensor i had this problem with my 3.0 alphard best route is to replace the maff sensor they not exspensive put oe no. into ebay 2220422010 maff sensor circled in red in the drawing
  3. oxegen sensor and fuel ratio sensor are 2 different sensors
  4. fuel ratio sensor is the top one at the manifold bottom one is a oxegen sensor
  5. The sensor you had replaced is not correct part no. The correct part no. Is 8954228100 so that is more likely the reason the light is still coming on the part no. You had fitted is a oxegen sensor not a fuel ratio sensor you need to get the correct part fitted
  6. Maf sensor can trigger same code air flow sensor
  7. Phil do you have the part no. Of the sensor you bought from toyota
  8. Hi might be a silly question have you turned the lights up
  9. L connector is below the battery to the right
  10. First picture showing roof moulding secound photo showing price tell me which side as 2nd photo is for driverside
  11. Which side moulding as they are handed
  12. Hi they got good taste what's your reg no. Wil, get the part no. For you
  13. if im guessing rightly this is a aftermarket android system you will need to change location settings within the radio you also may need 4g access
  14. To from what I can see from your photo looks like your alphard is lowered I have same kit and I have more clearance than yours mine was lowered and had put back to standard new shcks and springs all round £1200 just for parts then the labour cost
  15. No i don't have a campervan conversion I bought from my local motor factor's who also list on ebay
  16. When I bought my alphard 2 years ago it was lowered which I did not know I had a front shock go on it which turned out to be coil overs so I decided to everything back to standard so I had a hole new suspension fitted and had heavy duty springs fitted It now drives great handles amazing cost me £1200 just for parts best money spent
  17. You could fit heavy duty rear springs they standard height give it a harder ride
  18. What's you reg no.
  19. to behonest im getting fed up asking jpnz
  20. hello the prius pumps are not the same water outlet pipe different angle i have pointed a few members on here to the right pump which is listed on ebay £194.95 https://www.ebay.co.uk/itm/125378697379?hash=item1d312718a3:g:d1MAAOSwdKRjEd2c these are the cheapest on there this is my local supplier of alphard parts and i trust these guys
  21. Roger a local guy to me
  22. hi what's your reg no.
  23. looks like the hybrid inverter pump failing best to get sorted before it cooks the inverter if you part no. for the pump please give me your reg no.
  24. Well the option is to go for heavy duty springs these are standard height to the originals but give a harder ride so for you these should alter hight and carry the extra weight better
  25. Hello Chris do you know if your van has been lowered such as has it got coil overs
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.