Jump to content
Check your Alphards past history in Japan in detail with CarVX ×

PMC

Members
  • Posts

    2
  • Joined

  • Last visited

Posts posted by PMC

  1. Hi Teekay, our Alphard is a 2005 with 4 button remote (lock, unlock and 2 power side doors), once programmed all 4 buttons work fine, it has keyless entry as well so has the smart lock fob too, but this is working fine so I haven't had to program one of those. If your car has power tailgate the button will be on the smart lock fob.

  2. On 10/7/2018 at 10:18 AM, Djakninn said:

    Follow this to the 'T' and it should work no problem with the smart fobs to open and close the doors (It looks convoluted, but worked for me on 1st attempt)

    Before starting make sure you have no mobile phone in your possession/close by.

    1. Sit in the drivers seat - Driver door open, key out of ignition 

    2. Within 5 seconds, place key in ignition and take it out x 2 (Do not turn key)

    3. Within 40 Seconds, close the drivers door and open x 2

    4. Put key back in ignition (Do not turn key) and take it out

    5. Within 40 Seconds, close the drivers door and open x 2

    6. Key back in ignition and leave it in

    7. Close drivers door

    8. Turn key in ignition (Without starting car)

    9. Turn key back and take key out of the ignition

    (The door locks should automatically do a cycle - If nothing happens, you've done something wrong and will have to restart the re-programming again from the start)

    Once the door locks have did their cycle :

    10. Within 40 seconds press lock and unlock buttons on fob together for 2 secoonds

    11. Then press lock button on fob for 2 seconds (The door locks should do a cycle again, if they do not complete a cycle, repeat step 10 and 11 again. If the door locks cycle twice, it also means that the re-programming has failed so repeat steps 10 and 11 again)

     

     

    Thanks ever so much this worked perfectly on our 2005 3.0 2wd, we used a replacement 4 button remote from Aliexpress, including cutting the blade at the local key cutter it cost less than £20!

     

    I had to turn my phone onto airplane mode as it didn't work the first time!

     

    I managed to program the transponder using Techstream, it came up with two options up to 04/05 and 04/05 on, I had to use the second option.

     

    Thanks again.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.