Coxy1960

Hi all. Does anybody know where I can get one of these from. It's the circuit board for my hazzard lights and interior light dimmer switch.

My original problem was not a fuse in the end. I had fitted a new android unit and removed the speedo screen to run the WiFi mic and aerial wires. The control plug for the screen was not completely connected when I put it back. If this relates to you, try that. Otherwise there is a fuse panel under the glove compartment passenger side. Hope this helps.

Did not touch steering wiring. Just programmed the buttons on the steering wheel from the android unit. The unit was imported for my make and model so it was plug and play. The fault occurred when I put a Dab device into the back USB on the android unit and put the antenna across the steering column and onto the side screen. I am thinking I may of pulled a plug out somewhere as the indicators did not work and the dash display for the gearshift.

I am taking it to an auto electrician tonight to sort it. I think I may have unplugged a cable somewhere as I was fitting a new android unit in. Anyway. He is going to wire in my reversing camera at the same time. Thanks for your help. It is much appreciated.

Managed to get to the fuse board. It is underneath the big plug in area. It is not the meter fuse as that is OK.

Hi Rojie. I will have another look tomorrow. I did take the bottom glove box off but all I found was the air conditioner filter and a bank of plugs. Are the fuses behind the plugs? The horn works by the way.

The illuminated display for the gearshift only everything else is OK.

The lights on the dashboard and outside when the indicator switch is put up or down. Hazards work inside and out. No fuses inside the cab but only under the bonnet and they are all OK. Funnily the illuminated display on the dashboard is not working either , or the reversing beeps.

Hi. I need help. My indicators and gear shift lights are not working, but my hazard lights are OK. Fuse under the bonnet is fine.