drew12

On 8/8/2023 at 3:43 PM, Rojie said:

 Your model is the Gen 1, pre-face lift version.

Mine is the post face lift version.

 

The JPNZ Owners Handbook definitely states fuse 10 in the fuse box by the drivers seat.

 

Does the fuse box you have have 10 fuses, no more ?

 

My model is an MZ G Edition; so your seats are probably not the same as mine.

 

I'm sorry I cannot help further.

Mine is mnh15 I think it's the 3.0L AWD one.

I'm currently trying to find an ignition barrel, all my fuses are fine only other thing I can think of is changing all the relays 

1 hour ago, Picasso said:

The thing is you replaced it been OK now not not staring again this tells me you probably blown the fuse again but what's causing to blow I would check the fuse again and get the starter motor checked 

Have you got a part number for the brown relay ?

19 minutes ago, Picasso said:

Have you blown the starter replay fuse 

No I don't think so i've replaced that I think, is it the far left relay the 3 pin one 

On 9/12/2023 at 3:17 PM, Picasso said:

drew have you tried a spare key as i dont think it will be ignition barrell because if key turns ok barrell ok transponder pick up for the key is located on th out side of the barrel have attatched a drawing also you have the ignition starter switch both parts are available can point you in right direction of sellers 

This is trying to start the car with the spare key 

6 hours ago, Picasso said:

drew have you tried a spare key as i dont think it will be ignition barrell because if key turns ok barrell ok transponder pick up for the key is located on th out side of the barrel have attatched a drawing also you have the ignition starter switch both parts are available can point you in right direction of sellers 

I have replaced the ignition starter switch but no luck, I need to get a new case for my spare key as it has fallen to bits.

I'm currently trying to find someone who will have a look at the car for me because I'm at dead end with it 

No I swapped the ignition switch, I have rang a Toyota garage about the ignition barrel but it has been discontinued so I now need to try and find a second hand one or see if an ignition barrel from a different Toyota or lexus fit 

On 8/11/2023 at 9:25 PM, John Harrison said:

I'll ask my lad. He's the techy!

John H

Cheers mate. I'm having problems with car again it just flashes lights on dash then goes dead I'm thinking it might be an ignition barrel problem 

Thank you everyone for your help, the love bus is up and running again.

It all down to a relay in the passenger footwell 

59 minutes ago, Picasso said:

Drew let me know how you get on 

Will do mate I'm just waiting for the 100amp fuse hopefully it will be here by the time I get back from work on Friday.

Since changing a really (not quite sure it's the right one) I've now got lights on dash when the key is in position 2 

3 hours ago, Picasso said:

start relay fuse is located behind passenger glove box I have attached drawings from lookup system circled in red hope this helps location is 2 

Thank you for the help with this I would been scratching my head for days 😅

18 minutes ago, Picasso said:

Sorry i dont know your jus going to have to see if you can find it by the colour 

I think I've found it just need to replace a 100a fuse now 

1 minute ago, Picasso said:

your going to need to move a  thick wire harness  and look up words ideal use a mirror

Is the starter relay at the bottom on the fuse box in the passenger footwell ?

Something is clicking in this area when Im turning the key, has anyone got any idea what it could be ?

3 minutes ago, Rojie said:

 Your model is the Gen 1, pre-face lift version.

Mine is the post face lift version.

 

The JPNZ Owners Handbook definitely states fuse 10 in the fuse box by the drivers seat.

 

Does the fuse box you have have 10 fuses, no more ?

 

My model is an MZ G Edition; so your seats are probably not the same as mine.

 

I'm sorry I cannot help further.

It's the part marked on the picture in struggling to find 

4 minutes ago, Rojie said:

 

As Drew12 said

 

 That's fuse 10 in the box by the driver's seat.

I only have one behind the dash on the driver's side 

On 8/6/2023 at 7:53 AM, Picasso said:

 

Could you tell me where to locate this fuse on the car please I can't find it 

14 minutes ago, MonsterS said:

Could be the imobiliser chip, you said you had a new Ignition barrell fitted. Was it programmed afterwards to match your master key?

It was a new ignition switch I've had put on will it still need coding ?

the barrel seems fine 

7 minutes ago, Geralt said:

Good video. It shows that the "doors open" light remains on when you attempt to crank. That probably means your battery is fine.

 

The OBD reader not being powered could be the OBD fuse gone. That's fuse 10 in the box by the driver's seat.

Thnk you will have a check 

8 hours ago, Geralt said:

While this is a good thing to have, this is only of relevance if the check engine light is illuminated while the engine is on. It might not tell you why it doesn't crank.

This what's happening when I try and start the car 

8 hours ago, Geralt said:

While this is a good thing to have, this is only of relevance if the check engine light is illuminated while the engine is on. It might not tell you why it doesn't crank.

The radio and everything powers up when i put the key in but as soon as try and start the car nothing happens 

Could anyone tell me where to find the starter relay please, is it the main box under the bonnet or the one next to the battery 

9 minutes ago, John Harrison said:

Hi. I've been told that Jap vehicles have to have a different diagnostics plug in to ours. They can be bought on the internet, I believe?

John Harrison. Wirral.

ANCEL JP700 JOBD OBD2 Japanese Car Scanner, JDM Automotive Code Reader Check Engine Light OBDII Diagnostic Scan Tool fit for Toyota Nissan Honda Mazda Subaru Vehicle Diagnosis https://amzn.eu/d/2kEDJcg

Is this the correct reader ?

3 minutes ago, John Harrison said:

Hi. I've been told that Jap vehicles have to have a different diagnostics plug in to ours. They can be bought on the internet, I believe?

John Harrison. Wirral.

Thank you for that I will have look on Amazon for one 

32 minutes ago, kev1839 said:

Could very well be a bad earth too . Make sure all the connections to the bodywork are clean and tight 

I've not checked the to see if the earths are tight to be honest I've noticed there is about 4 or 5 of them though 

ive have a new batter put on this week and the starter motor gas been off and tested, that was fine 

I have tried to get a diagnostic done but when they plugged it in the ODB wouldn't power the reader