karsten doering

Yes great, many thanks. Solution so simple and so true. What a relieve.

Now it was easy work.

I apreciate your help.

Karsten 

Hello,

I have a 3.0 6v Alphard from 2004 and I'd like to change my oil and for that also the filter. The filter ist hardly to reach. Does anybody has experience with changing the filter without remove the coolant unit and the fan? Or is it necessary. I would appreciate a hint. Thanks guys.

Karsten 

I removed the Plastic paneling. And did not yet repair anything,  and now the front heater is working and the front flip is moving. but in the back the air is cold.

I have no idea what happend. Is there any part I could have touched which regulates back and front?

It is resolved, I have the access.

Hi Geralt,

I ve bought the recomended cable and software kit. At one point of the installation it sais "to get the licence key send me the software ID.."

Unfotunately it nowhere sais where to send it, to get the licence key.

Do you have an idea?

Greetings

Karsten 

On 7/28/2021 at 7:48 PM, SHIBALONDON said:

Hi Guys,

 

For anyone who is looking for the roof rack for Toyota Alphard 2002 - 2008 I came across this:

 

https://www.ebay.co.uk/itm/154540615511

 

https://www.ebay.co.uk/itm/154543054958

 

 

 

 

 

I got one of them and I am very happy with the purchase. It fits my car and the quality is very good as is produced specifically for Alphard. 

Hi,

The link doesn't work anymore. Do you have the contact ?

I'm not an expert but I've done some research.

Toyota did put filters for the batterie cooling fan at their hybrids between 2010 and 2012. From this time on the batteries lastet very much longer.

Imortant is if the filters are been cleaned and changed regularly. So check the filter if you buy a hybrid.

Thanks, big help. I think I follow your recommendation.

Ok thanks, good idea.

I tried that and there is no noise where it should be, regarding your video. 

At the back I could hear a noise. So probably thats the reason.

Next week I will have someone reading out the computer connecting via the OBD port, which toyota couln't read. Then I should be save with the diagnosis. 

Great help, thanks.:)

Thanks for this valuable information. I will get the techstream software. Any idea where i could get the right OBD plug?

Toyota germany doesn't know about Alphards and the model 2004 has a different pin assignment as far as i know. That's why no workshop here can use the obd diagnosis at my car. 

Great Link and video. Thank you very much.

I can't say if the actuator is moving it doesn't make any sound. Can you hear it if it is moving?

I checked it, there is no air in the System. 

But i just noticed in the rear the heater is working. Does anybody know what the reason can be? 

Hello Guys

does the AncelJP700 work also for 2004 3.0 6V? Any experiences

Thanks for your answer. I will do so. Does anybody know where the heat- exchanger is. I want to clean it.

Hello, I have an Alphard 2004 with a 3.0l machine. My heater doesn't work. It has enough liquid and the thermostat is working. Does anybody know how to clean the heatexchanger or how to replace it.

A manual would be marvelous.

Greetings Karsten 

Thank you Rojie

Hello Alphard fans,

since this week I have a 20 year old Alphard in quite good condition. I m from Germany and I m already hooked from that marvelous vehicle.

Nice to be here.

Greatings

Karsten