ombakjernih

Hi @TonyOh Yes. Pin 11 & 12 from meter. Then pin 13&16 to HU. You can refer my photo. If not working, you can swap position pin 11&12 Update here if can work or not.

You theory is wrong. You still need canbox because only canbox can translate data code from the car to Android HU.

So far this setup still same as before. But i try use other brand canbus like Hiworld and not much information I got. Raise canbus can read more data like external temp, odometer and remaining range. For your 2nd question, the cable you circled, connected to canbus input CanH and CanL.

Yes. To use canbus you need to have 40pin or connect directly to diagram I share.

Yes. My HU come with 360 camera. As per new different technology my advise is change with new camera. You need to buy canbus with decoder amplifier as you mention with 18 speaker.

Yes. Either you tap from meter or obd still the same. this is the wiring to get data Tx & Rx from canH and canL only. But the obd port I connected with elm327.

Hi everyone. I installed android player to my car since 2022. Before this I never bother about the extra function using canbus box because my car didn't come with 18 unit speaker. Last year I make a study about the function of canbus and make some modification. 1) I bought the socket for meter 40pin. This socket connect to canbus box and HU. Original for other car. 2) I change the connection point to 13&14 follow the diagram 3) then I bought canbus Toyota from raise. 4) after that setting the HU You can get information like - parking trajectory - door information - parking radar - outdoor temperature - millage odometer - average consumption