Mark202020

On 3/27/2024 at 12:15 AM, hellofriend said:

I posted in a other forum but thought I'd just share here that I bought the £10 stalk off eBay for my 2008 Vellfire and it fitted super easy and cruise control works. (No light on dash to confirm it's on but soon get used to that). 

 

So a success thanks to this forum

On 3/28/2024 at 1:44 AM, lee37 said:

I'm looking to add cruise to my 2003 3.0.

I know it has been done before using an Rx300 actuator with cable, auris or similar 4 pin brake switch, previa cc ECU and control arm.  I have wiring diagrams etc.

 

I have checked and I have the correct plug under the bonnet, I have the 4 pin wiring for the brake switch but I can't find the plug for the ECU.. I thought it may be behind the coin holder thing under the door switches but I can't see it.  Now looks like it could be under dash behind stereo near glovebox. 

 

Does anyone know for definite where the cc ECU is so I can chase the plug down please?!

 

Thanks

.  Did you end up getting the dash light to light up? If so how. Mines not turning on either.

On 7/23/2023 at 12:18 AM, Biggeordie55 said:

Update. its a bit of a tail but it has a happy ending. after my first attempt, which i followed the online video and pulled the connecting plug apart to expose the wires, which didn't work i notices a socket that the original connector would have fit into so i bought another £10 kit as i needed a new cable. Went back in and plugged the cable connector into the socket on the steering wheel. Reconnected the battery and still no dashboard cruise light, oh well for £20 it was worth a try. Later i went out on a journey and when i was on the motorway i thought why not give it a go and low and behold the cruise control was working, still no cruise light but i noticed the ECO light was on permanently. So no cruise light but I have cruise control with the ECO light staying on when activated. Now if anyone knows a fix for the light that would be great but I have cruise control which was the point of the exercise.  

Did you end up getting the dash light to light up? If so how. Mines not turning on either.

On 7/31/2023 at 2:11 AM, Charlie Brown said:

Hello All. My experience is very similar to this, I fitted cruise control, which works fine, but no cruise control light on the dashboard, (no ECO light either). I thought it was because I have a new speedo head fitted (which is in miles and mph) and thought they hadn't connected it up or something. Have others who have followed this process got a cruise control light on their dash or is this something that does not work with this method. Thanks.

Did you end up getting the dash light to light up? If so how. Mines not turning on either.

On 4/26/2024 at 5:51 PM, arcascomp said:

Another successful cruise upgrade completed on my 2009 vellfire. As above, the no expense spared £9 stalk I've fitted works, but doesn't light up the cruise light on the dash. My stalk only has two wires, is there different ones that do also turn on the cruise indicator light? 

 

Secondly, seems I ordered the trim piece for a 10 series by mistake, any pointers for the right trim piece for a 20 series?

Did you end up getting the dash light to light up? If so how. Mines not turning on either.