johnh

On 9/4/2024 at 4:51 PM, Jeza said:

You just need to remove the lower glove box, unship the ECU, the fuse box is up behind next to the bulkhead. Lie on your back in the passenger foot well look up and you should see it. You will need a pair of long nose pliers. 

thanks for reply,will give it a go

thanks for reply,will have a look

Hi Does anyone out there have any idea how to remove the top Glove Box from a 2002 Alphard?

Any help would be appreciated as I need to get to the fuse box behind it for the cigarette lighter.

Thanks John 

Good idea, will do.

Regards John

Many thanks, it certainly looks like the right one. Have one one on order.

Regards John

Hi it varies, it's our main vehicle so around town but quite a bit going to Yorkshire for baby sitting duties from Newquay .

Cheers John.

Thanks for reply.

Regards John

Hi Lee The reg, is WL52 WDA. VIN MNH100014734.

Many Thanks John

I am having problems with cutting out after starting. If you keep your foot on the accelerator for about 30 secs once started on slow tick over the engine runs ok. 

This doesn't happen all the time though. The garage I went to said the fault code said it was The Pre Cat O2 sensor.  Anyone have any idea where I can obtain one of these please