Canbus android Head Unit

[ombakjernih]

Hi everyone. 

I installed android player to my car since 2022.

Before this I never bother about the extra function using canbus box because my car didn't come with 18 unit speaker.

Last year I make a study about the function of canbus and make some modification.

 

1) I bought the socket for meter 40pin. This socket connect to canbus box and HU. Original for other car. 

2) I change the connection point to 13&14 follow the diagram

3) then I bought canbus Toyota from raise.

4) after that setting the HU

 

You can get information like 

- parking trajectory 

- door information 

- parking radar

- outdoor temperature 

- millage odometer 

- average consumption 

 

[Rojie]

52 minutes ago, ombakjernih said:

Hi everyone. 

I installed android player to my car since 2022.

Before this I never bother about the extra function using canbus box because my car didn't come with 18 unit speaker.

Last year I make a study about the function of canbus and make some modification.

 

1) I bought the socket for meter 40pin. This socket connect to canbus box and HU. Original for other car. 

2) I change the connection point to 13&14 follow the diagram

3) then I bought canbus Toyota from raise.

4) after that setting the HU

 

You can get information like 

- parking trajectory 

- door information 

- parking radar

- outdoor temperature 

- millage odometer 

- average consumption 

 

 

Hello Ombak,

 

Welcome to the Forum.

[Voodoo101]

Hi

 

I looked into getting Canbus information to the head unit but there is no signal in the wiring behind it. It looks in your photo that you are taking it from behind the dashboard which makes sense as all the data is shown on the dash. I think you can also get it from the ODB socket, in fact I bought a cable a long time ago from AliExpress that came with an ODB plug. I never tried it

[ombakjernih]

5 hours ago, Voodoo101 said:

Hi

 

I looked into getting Canbus information to the head unit but there is no signal in the wiring behind it. It looks in your photo that you are taking it from behind the dashboard which makes sense as all the data is shown on the dash. I think you can also get it from the ODB socket, in fact I bought a cable a long time ago from AliExpress that came with an ODB plug. I never tried it

 

Yes. Either you tap from meter or obd still the same. this is the wiring to get data Tx & Rx from canH and canL only. 

But the obd port I connected with elm327.