James Brown
-
Posts
23 -
Joined
-
Last visited
James Brown's Achievements
-
Thanks, PM just sent
-
Many thanks.
-
Ok & yes please send, it may help - info@militariafairsuk.com Many thanks.
-
Excellent, many thanks.
-
Hi all, can anyone recommend an electrician / mechanic in Suffolk, Norfolk of Essex ? Thanks in advance.
-
Hi, Just came across your post whilst searching for a wiring diagram for the speedometer / odometer. They have stopped working. Is this one you have? 2.4l HS07 GNP Frame - ANHIO-0174048 Thanks in advance.
-
The manual was sent after they closed yesterday & he probably hasn't looked at it yet. Can you tell me what page of the manual the above information is on please. As you can gather, I'm totally ignorant about wiring systems & jargon!!
-
2007 2.4L
-
Received this from electrician. It’s not a can bus system on your vehicle. it’s a simple square wave signal in a dedicated speed signal input but the issue is where that comes from the cluster then sends a speed pulse to the engine ecu There talking about a later model that has a can data driven speed signal
-
-
Hi Richard, Many thanks for your impute. It has a chip to convert to mph. The auto electrician checked that says that it's not the chip. I showed him the transmission speed sensor info that lee sent & he says that I probably won't need them as it's likely to be the gear box sensor & he needs a wiring diagram to investigate as he's not familiar with the 2 wire system. I can't find any info re a wiring diagram on the Forum, can you point me in the right direction to get one? I'm completely in the dark about these things I'm afraid!
-
Many thanks for that advice. Does the speed sensor wiring go direct to speedo / odometer head or other ?
-
Hi again Lee, Looks like you may be right about the speed censors. The auto electrician needs a wiring diagram as he says the 2 wires do not go straight to the speedo head. Is one available on the Forum? Also, part numbers for the 2 speed censors & recommended supplier, Toyota are quoting £168 + vat each. Thanks in advance for any help.
-
Thanks Lee.