Jump to content
Check your Alphards past history in Japan in detail with CarVX ×

sarath

Members
  • Posts

    7
  • Joined

  • Last visited

Personal Information

  • Name: Sarath
  • Alphard / Vellfire Model
    Alphard 2.4 Petrol (02-08)
  • Alphard / Vellfire Year
    2002
  • Your Location
    Corby

sarath's Achievements

Newbie

Newbie (1/14)

  • Dedicated
  • Reacting Well Rare
  • First Post
  • One Month Later
  • Week One Done

Recent Badges

0

Reputation

  1. Thanks Rojie for the feedback.I am not in a hurry and will only fit if it is safe and secure, if it is not safe I may resell it as an option,so it may be correct for other vehicles
  2. Thanks Rojie,I believe the offset is 25 and is conical. Some additional details attached regarding the wheels
  3. Hi,I have got some after market alloys.Do we need to change the OEM lug nuts for these alloys as they seems not fitting for after market alloy.Attached is the new wheels. Found some lug nuts like the below which seems to fit.Any recommendation or suggestion please? M12X1.50mm Max Guard Racing Composite Wheel Nut Close End Heavy Lug Nuts 20 Pcs
  4. I seems to have a similar problem on a 2002 alphard 2Azfe fwd 2.4L,as it works very rarely when it is too much raining.Otherwise most of the times it seems to reaching till 20 mph and then jumping to 30 mph and then coming back to 20,even at higher speed.On rare occasions on some days the speedometer seems to be fine.One garage advised to change speed sensor but was of no use after changing.I believe it is loose earth,as it works on heavy rains some how,but not sure where to find this loose earth issue.Any suggestions would be much appreciated.
  5. Thanks Rojie, definitely it is not the windows as they are closed fully. Sorry for the query, where can I find the door sensors, is it in a place where we can clean without opening the door panel.
  6. Does the door open on a slightly inclined driveway.It seems like about to open half way and then stop in between and closes automatically. Also I tried from a levelled surface as well,it seems to be doing the same,trying to open half way and close.The same thing happening when trying to close as well through the key or the button. I can mostly open it with a bit of force manually and close as well in the same way.Any ideas please or is this need any reset of problems with motor? Thanks
  7. I have seen a similar performance difference between e10 and e5.I was continuously using e10 as I was told by the dealer it is OK.Issues I have noticed is it was not accelerating when I need it to be and was sluggish going above 70 mph. When changed to e5 it seems to be smooth.Mine is 2.4 2AZFE engine and one of the oldest cars probably 2002.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.