Simbad

Following with interest. What year is your car? I’m sorting my stalk and fog lamp on Monday. As previously mentioned I have a relay but mine is supposed to be located underneath the passenger footwell not in the engine bay as you showed - is this even the correct place for you? I have a 2012 facelift Alphard 3.5. Based on all the info I sourced, my plan was to install the stalk, possibly add the relay (many mentioned their cars already had this present) that is located underneath the passenger side footwell and then just install the fog lamp to the blank connector that is supposed to be on the right side behind the bumper using the plug connector I bought on eBay (pic below). The reason I ask is because my method seems to be plug and play only.

Thanks to this group I secured insurance with Adrian Flux (van is still on the ship) via chassis number. I'll be able to drive the car myself to an MOT station and then home, as per their T&Cs. £470 for the premium itself, but then if you add all the fees and the fact I'm paying monthly, it'll be £680! Still ok for the first year I guess. I'll look around once my car is registered, etc.

Hey Chris, thanks for the message. This is what puzzles me (and I guess I'll find out when the car arrives) because I am hearing that on 20 series relay is already there (I bought one anyway just in case). Was relay not present on your 20 series? Also, I am installing the stalk and people advise that if you're using the stalk then relay wasn't required whereas if you're adding some button in the blank space then yes, relay may need to be installed. I am planning to use the existing socket, as seen in your picture on page 4, as it is specifically designed for OEM fog light (left blank on those vehicles that didn't opt to have it installed from factory). Do you know what connector/plug would I need to attach to this. I found the part number being 81215H and so probably this connector is right?

I'm following this post with great interest as my 2012 Alphard is due to arrive on the 25th of December, and I’m planning to install the fog light myself. Here’s what I’ve purchased so far: A stalk A relay (though many suggest that if you’re using the official stalk, the relay isn’t necessary as it’s already built-in – is this true or false?) I’m now deciding whether to buy a reflector light or fit an OEM unit, which some Alphards come with from the factory. However, in my opinion, the OEM design is quite unattractive – see the photo below for reference. If I go for the OEM look, this is what I’ll need to purchase. The installation will require cutting the rear upper bumper on the passenger side. The only advantage I can see is that it offers a plug-and-play connection using the OEM socket. Another option is the Valenti reflectors, which are quite pricey and only available from Japan. If I’m correct (please do correct me if I’m wrong), would these require removing the socket and hardwiring them instead? I’m hoping to avoid rewiring the entire car since I plan to use the stalk. https://www.amayama.com/en/genuine-catalogs/epc/toyota-japan/alphard/GGH25W/80091/electric/8116