Hello

my 54 plate 2.4 alphard hybrid has worn axle bushes and ? Bearings (the rubber mounts the axle sits on)?? Sorry but not sure of the correct term but they are all the rubber left oking pieces!

please can somebody tell me the proper names and part numbers for my vehicle and if you have any suggestions where to source them it would be appreciated. Thanks.

is it a big job to replace them and any ideas of likely costs please?

thanks everyone 

Hello james they are call rear axle subframe bushes check this link    https://www.ebay.co.uk/itm/384959399890?itmmeta=01J5NDWZ4RA2EWQB8ZYJEW6YZZ&hash=item59a15e47d2:g:6IAAAOSwvdxdHx-a   labour wise its about 4 hour job they have to drop the rear subframe your looking about £300 labour cost then + price of parts 

Thank you Picasso that is very helpful and much appreciated. James

Are there similar for the front and beneath on the rear axle?

these are for the rear axle as your photos

Yes thank you but I have a similar problem at the front. I think this might be a picture from the front?

is there a complete kit for all the bushes as I suspect all may be equally ‘unwell’!

thanks again.

Front arm bushes be quicker and cheaper to replace the complete arms as the bushes need to be pressed out check these two links https://www.ebay.co.uk/itm/384959839141?fits=Car+Make%3AToyota|Model%3AAlphard&_nkw=toyota+alphard+suspension&itmmeta=01J5Q4VE39SQDZGMK76PVZJ8N2&hash=item59a164fba5:g:ldMAAOSwznZh4Zx3&itmprp=enc%3AAQAJAAAA0HoV3kP08IDx%2BKZ9MfhVJKkwSC05juHoDZvSp8sbw%2Bgx0S%2FyEKSUADbheupBNXDVnwm9RF6Ugvps9Eckhd54x%2BZ%2FuEijdA7Og4CEa53M0wO1aHzoLPG5vsdLkd4ji5bMdbg17m%2Fs2bijUPsxcwEE5%2FbjkLu8mZEOQJFkvw5KD1aEI4GjXbFxe7PUo8odxXHbmxvydqnX8r8vqq%2FNYsyObvQ6r5DjPA5YDv97xBswZJi52sNQFqWtdT4jaE9JtoXdT%2BJb6471vhVGKOPKpORtaFQ%3D|tkp%3ABk9SR9zh7eStZA

 

https://www.ebay.co.uk/itm/384959839118?fits=Car+Make%3AToyota|Model%3AAlphard&_nkw=toyota+alphard+suspension&itmmeta=01J5Q4VE39BG4AV1AYDPZPG06Y&hash=item59a164fb8e:g:rFkAAOSwf75h4ZsQ&itmprp=enc%3AAQAJAAAA0HoV3kP08IDx%2BKZ9MfhVJKnOvnG140AHlxbuVCMnhzOJRjgzlUofDqMUnx0K%2BSYXi%2B1Z%2FMpiY9nld3AQn2OIUq9apTjel7Jgy249PJTQcEBfi3%2FWXjK8vLz0xKgXpr0NOgMHfRvKviLrDFVfmFIC%2FqvbHKAs6b2tnS5d%2FW0w8kPn%2BVWvSuov9ZH9p506Qpfoe1FVi6ELjGIcDdlhNw8vAtOzLqDGttYE53cDDV7rnWSYFZKgn0xMBd%2BGnoCh84MI532Z2qMDEyegoazx6lVjZPk%3D|tkp%3ABk9SR97h7eStZA

 

Looking back at the rear bushes who ever been doing your mot for the last couple years has not been doing very good at there job at it them bushes have been ain a very bad way for more than 12 months 

thank you again really appreciate your help.

Looking up the parts it ask me if my hybrid is 96KW or 117KW. I have looked through my papers but can’t find out which it is. How can I find out the model please

All early 10 series hybrids are 96kw at 5600rpm.

(109kw including the hybrid motors)

Thank you Jess. That’s very helpful.

They will need a forklift to remove the axel. Mind was done within 2 hours. A good mechanic will do it quickly.

Please does anyone have a link to source front and rear brake pads and fitting kits for my 54 plate 4WD 2.4 hybrid Alphard? 
have looked on eBay but not sure which are good ones or the right fitting kits! Thanks 

Hello James can you please give me your reg no. Pm me it if you want to