Hello

Hoping someone can advise.  2005 Alphard 2.4 model.

I had the rear seats folded up and recently restored them to seat positions.  Unfortunately one of the seats has somehow missed connecting back in the floor slider properly.  The front connecting bar under the seat has gone in the rear connection point and the rear connection bar has nothing to connect to.  Seat cannot slide or raise to side as not in line with side arrow.  Completely locked seat.  Any ideas how i can realease the connection and put slider back in line?  

Many thanks

Woo

1 hour ago, Wendy Burr said:

Hello

Hoping someone can advise.  2005 Alphard 2.4 model.

I had the rear seats folded up and recently restored them to seat positions.  Unfortunately one of the seats has somehow missed connecting back in the floor slider properly.  The front connecting bar under the seat has gone in the rear connection point and the rear connection bar has nothing to connect to.  Seat cannot slide or raise to side as not in line with side arrow.  Completely locked seat.  Any ideas how i can realease the connection and put slider back in line?  

Many thanks

Woo

 

Hello Wendy,

 

Welcome to the Forum.

It sounds like the seat will need releasing from the floor runner - there should be a lever / slider to move to get it to release the seat. If you could send a picture it would help in understanding and suggestions.

Tha k you so much. Will post photo shortly. Not worked out how to release. Only Vellfire on youtube but slighy diffetent.

Problem solved!

Garage released jammed floor runner so all good now.  Thanks for support.