James Brown

Thanks Lee, managed to complete order, BUT they're quoting delivery 10 October - 5 December !!

Thanks, I'll try again. .

Thanks for info Roger.

Hi again Lee, I have received the below email from Amayama. When I made the order I asked for it to be colour coded & include all of the fixings !! I've tried in vain to navigate through their ordering system!! Sorry to be a pain, but could you please send me another order layout as previous to include all of the fixings that I'll need. 76914 (LH) Colour code silver 1E4 Clips top of panel 75397-58010 x 5 Clips bottom of panel 76933 x 4 The bolt on top right looks ok As the whole moulding was ripped off, It looks like I will also require the bar - part 76926D. What do you think ? Email from Amayama - Please reconfirm the exact parts required via the diagram, including any smaller parts which may not be included in the main assembly: https://www.amayama.com/en/genuine-catalogs/epc/toyota-japan/alphard/anh10w/36857?frame_no=ANH10-0174048 Clicking on the factory code in the diagram will provide the full part number (and a link for the part number page where it may be added to your cart).

Hi lee, Many thanks for info. Great that it's colour coded & clips are supplied. Just ordered one.

Front. Found a black one on ebay, but can hold out for a colour match if I have to.

I lost my near side passenger door moulding whilst driving! I will also require some clips. Can anyone recommend a supplier for a replacement. May have to get it resprayed if colour match unavailable (Silver 1E4). Many thanks in advance. 2007 2.4lt. silver Alphard HS07 GNP.

Many thanks.

Ok & yes please send, it may help Many thanks.

Excellent, many thanks.

Hi all, can anyone recommend an electrician / mechanic in Suffolk, Norfolk of Essex ? Thanks in advance.

Hi, Just came across your post whilst searching for a wiring diagram for the speedometer / odometer. They have stopped working. Is this one you have? 2.4l HS07 GNP Frame - ANHIO-0174048 Thanks in advance.

The manual was sent after they closed yesterday & he probably hasn't looked at it yet. Can you tell me what page of the manual the above information is on please. As you can gather, I'm totally ignorant about wiring systems & jargon!!

2007 2.4L

Received this from electrician. It’s not a can bus system on your vehicle. it’s a simple square wave signal in a dedicated speed signal input but the issue is where that comes from the cluster then sends a speed pulse to the engine ecu There talking about a later model that has a can data driven speed signal

Hi Richard, Many thanks for your impute. It has a chip to convert to mph. The auto electrician checked that says that it's not the chip. I showed him the transmission speed sensor info that lee sent & he says that I probably won't need them as it's likely to be the gear box sensor & he needs a wiring diagram to investigate as he's not familiar with the 2 wire system. I can't find any info re a wiring diagram on the Forum, can you point me in the right direction to get one? I'm completely in the dark about these things I'm afraid!

Many thanks for that advice. Does the speed sensor wiring go direct to speedo / odometer head or other ?

Hi again Lee, Looks like you may be right about the speed censors. The auto electrician needs a wiring diagram as he says the 2 wires do not go straight to the speedo head. Is one available on the Forum? Also, part numbers for the 2 speed censors & recommended supplier, Toyota are quoting £168 + vat each. Thanks in advance for any help.

Thanks Lee.

Hi lee, Taking to garage, will advise when done. Initially thought that someone would recognise this fault.

Hi all, Looking for advice on which part needs attention/ replacing. Engine warning light is on & odometer is not moving from zero. Then whilst driving, revs will drop then surge for split second & warning light goes off & odometer will register for a short period then back to zero with warning light. Any ideas please.

Thanks for info., all sorted now.

Many thanks for info.