Toe-in settings?

[Philip Ibbs]

I Bought my Alphard 3 litre form Newacre cars in Coventry in March, finally getting the keepers logbook in October.....

Having fitted new tyres on supplying the car, the inner edges of the fronts have already got marked wear on them. I have bought the NZ translations of the handbook, but can't find a value for setting the tracking. I know a lot of modern cars run 20' toe out, but this does cause a lot of wear, especially considering the negative camber that most have, so I'm happier running toe-in.

Does anyone have a value, or can point me to a table? Thanks

[MonsterS]

There was a system that the alphard are actually on I thought it was star something. I'll have a look and see

[benpenzance]

Any advance on this? Would really help me out too 

[Chris.ac]

This any good?

http://www.jltechno.com/en/alignment_specs.php?brand=Toyota&ModelName=Alphard/Vellfire:H10 Series:ANH10W&ModelID=610362

 

[pcous]

Hi Philip,

Like Chris, I found the jltechno figures, but after continuing problems I was also given these wheel alignment figures for 2002-07 Alphard, which came from our wheel alignment specialist, who searched Japanese data. They're a more extensive set of figures, but for some values the tolerance range is narrower than the jltechno figures (e.g. toe front & rear)

 

Toyota->Alphard H10 Series:MNH10W

 

Wheel Alignment Specification

 

Parameter	Minimum		Maximum
Front Total Toe	-0.10		+0.10
FL Toe	-0.05		+0.05
FR Toe	-0.05		+0.05
FL Camber	-1.25		+0.05
FR Camber	-1.25		+0.05
FL Caster	+1.40		+3.10
FR Caster	+1.40		+3.10
FL SAI	+10.05		+11.35
FR SAI	+10.05		+11.35
FL Included Angle   FR Included Angle   Front Cross Camber	+8.40   +8.40   -0.45		+11.40   +11.40   +0.45
Front Cross Caster	-0.45		+0.45
Rear Total Toe	-0.15		+0.15
RL Toe	-0.08		+0.08
RR Toe	-0.08		+0.08
RL Camber	-2.0		-1.0
RR Camber	-2.0		-1.0

Difficult to know which are correct....

 

[ijk]

I just went to ATS and it really was a case of "computer says no" - he couldn't find the Alphard so could even measure the values.  I left without any information.

 

Surely they must be able to put in a generic vehicle to get the system to measure the wheels?

 

Does anyone have any ideas where I can take it to have the alignment checked please?

[Rojie]

2 hours ago, ijk said:

I just went to ATS and it really was a case of "computer says no" - he couldn't find the Alphard so could even measure the values.  I left without any information.

 

Surely they must be able to put in a generic vehicle to get the system to measure the wheels?

 

Does anyone have any ideas where I can take it to have the alignment checked please?

 

A Job's worth situation !

[Dave 400]

Taking mine to vantage toyota in leeds they say they can do tracking they have done other work on mine and are toyota main dealer