Jump to content
Check your Alphards past history in Japan in detail with CarVX ×

Recommended Posts

Posted

For a while I have been worried that the steering on my 2003 alphard hasn't "felt" right. When the last set of front tyres lasted only 8 months I was sure there was a problem so I took it into my local Toyota garage for investigation. They found issues with the steering and also with the front and rear suspension.  Items that need fixing and the costs are :-

 

Steering. N/S track rod worn. Inner rack arm joint worn.       Cost   £511

Front Suspension. Both ball joint boots split.                          Cost   ££218 each

Rear Suspension. Both suspension bushes worn.                 Cost   £775 each

                                                                                            Total Cost   £2497

 

I'm obviously not a mechanic and I'm happy to pay a fair price but I can't help feeling that's a bit excessive. Can somebody out there reassure me that that's the right price and put my mind to rest.

Thanks,

Dave

 

 

Posted
2 hours ago, david said:

For a while I have been worried that the steering on my 2003 alphard hasn't "felt" right. When the last set of front tyres lasted only 8 months I was sure there was a problem so I took it into my local Toyota garage for investigation. They found issues with the steering and also with the front and rear suspension.  Items that need fixing and the costs are :-

 

Steering. N/S track rod worn. Inner rack arm joint worn.       Cost   £511

Front Suspension. Both ball joint boots split.                          Cost   ££218 each

Rear Suspension. Both suspension bushes worn.                 Cost   £775 each

                                                                                            Total Cost   £2497

 

I'm obviously not a mechanic and I'm happy to pay a fair price but I can't help feeling that's a bit excessive. Can somebody out there reassure me that that's the right price and put my mind to rest.

Thanks,

Dave

 

 

 

Hi David.

 

I suggest you call NorthStar Conversions and ask them who they use.

 

Those charges are excessive, but if you go to a main dealer that is probably about what they normally charge.

Posted
2 hours ago, david said:

For a while I have been worried that the steering on my 2003 alphard hasn't "felt" right. When the last set of front tyres lasted only 8 months I was sure there was a problem so I took it into my local Toyota garage for investigation. They found issues with the steering and also with the front and rear suspension.  Items that need fixing and the costs are :-

 

Steering. N/S track rod worn. Inner rack arm joint worn.       Cost   £511

Front Suspension. Both ball joint boots split.                          Cost   ££218 each

Rear Suspension. Both suspension bushes worn.                 Cost   £775 each

                                                                                            Total Cost   £2497

 

I'm obviously not a mechanic and I'm happy to pay a fair price but I can't help feeling that's a bit excessive. Can somebody out there reassure me that that's the right price and put my mind to rest.

Thanks,

Dave

 

 

 

The N/S track rod about £20, the rack arm joint about £25 ish about an 1 hour to 2 to fix

front suspension boots £30 for a pair and about an hour to fit

Rear bushes £50/60 and about 2 - 3 hours labour.  

They clearly do not want the job. I'd take it to a 3rd party.

Posted

Main dealers will generally be a lot more expensive than a small independent, that much we all know, my advice would be to do a bit of research and find a reputable trustworthy garage and stick with them.

Posted

Take it for an MOT, then do the jobs that come up at a small local garage you will find a huge reduction in price. After I had my two new track rod ends on my 2008 Vellfire. The mechanic asked "Why didn't you buy just the rubber boots?" I told him I didn't know you could and he said "I've got a box full of them!!!"

Always go to a few  smaller garages for estimates to have work done and ask questions!!!

John  

Posted

A note though, main dealers are helpful for prices, numbers and detail sheets of components.

Quite often they will print out diagrams for you, if you ask?

 

John Harrison. Wallasey

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.