MonsterS

Make sure you put copper slip on the back of em.

Welcome 

Welcome, if you need info or help just let us know.

James PM me with your email and I'll send you a virtual machine of that system I have

I'll get that over to you in the next few days.

I've checked and no, I can download and send over pdf's but it's not specific to your vehicle. it's just a generic version.

I have a mnh10 I can check my software.

Anyone got a spare 17" alloy wheel? I'm looking to replace my "get me home tyre" or space saver.

Mine is not in good shape.

I got a pack as well from AliExpress that cost me £5 and they fit the bumper and side panels.

Gone up a little since but use this one

@Ian PrestonI've pm'd you and added what I know to it. I do not have a gen 2 so it might be slightly off.

I agree with Catweazle. 
If you are capable of doing a few bolts and screws do it your self.

Most panels are either screwed, bolted or pop clipped on.  Easy to change over, only the main frame and interior shell is welded. everything else can be swapped.

That sounds amazing, However I don't have the skills, i've tried to tint windows before (flat surface) and end up with a ton of mess from it. 

I do like the film, maybe post the link if you can that would be fantastic.

I am just going parking it so the front points to the house and is covered from the sun.

Welcome, Yes i've got the same model but not a camper. How you finding the insurance?

Okay, so i've managed to clean it right up, but it took about an hour for just one. 

1. mask off all paint work

2. get the following grit sand papers on a drill 250, 400, 600, 800, 1000, 1500, 1800, 2000, 2500, 3000

3. work with each one going one way and then the next one the other. (keep it wet)

4. then use polish to buff the head light and finally clear UV paint spray to clear coat it.

They turned out like new. Took some elbow grease and some time.

yeah, I can connect my Mini 2 to Meta quest 2 googles.

sounds like the cv joint.  Does it happen at any other speeds?

They are all clipped and tied together using clips and screws.

easy fix, just put your hand underneath and pop it back. 

All lights are LED's soldered onto the vehicle speedo's itself. Rojie is correct they will be the fuses under the drivers side panel. you have to be a contorstionist to get at them. 

On 5/8/2025 at 7:15 PM, Catweazle said:

Looks good....are they easy to fly?

Do you have a screen on a control panel, or a big visor thingy?

I hook up my phone to the controller, there are some that have a built in screen but they are normally over 250g.

Only because the wife and I cleaned it

Hi all, Anyone got a drone?
I though i would have a crack at a video on my vehicle.

Currently running DJI Mini 2 SE

Video here.

I have the wiring diagrams on the forum. HERE

anyone tried dry ice to restore them?