Jump to content
Check your Alphards past history in Japan in detail with CarVX ×

Picasso

Moderators
  • Posts

    853
  • Joined

  • Last visited

  • Days Won

    53

Everything posted by Picasso

  1. Try Ian taylor uk Ltd he is a alphard importer I'm sure he will point you in right direction
  2. There is a company I know that can make you a replacement they copy the original condenser for about £450 takes about 5 days if you pm me I will give you there details
  3. Not all early alphards are ulez compliant about 2006 onwards I think
  4. I don't own a hybrid but I know a bit about them only buy 1 2008 onwards
  5. Why download a pdf version when you can buy a paperback version on ebay or amazon
  6. Coil pack
  7. The thing is you replaced it been OK now not not staring again this tells me you probably blown the fuse again but what's causing to blow I would check the fuse again and get the starter motor checked
  8. Have you blown the starter replay fuse
  9. You can have a canbus chip fitted which will change it to read in miles chips cost about £180.00
  10. Hi What's your reg no. Or vin no.
  11. drew have you tried a spare key as i dont think it will be ignition barrell because if key turns ok barrell ok transponder pick up for the key is located on th out side of the barrel have attatched a drawing also you have the ignition starter switch both parts are available can point you in right direction of sellers
  12. You could be looking at having the aircon compressor replaced or rebuilt if it turns out to be compressor pm me can point you in right direction to have rebuilt
  13. Did you buy from a dealer or private sale
  14. You need to get the ac tested as you may have a leak ac system does not cool the hybrid system
  15. Hi you profile says yours is a 3.0 not 3.5 if start motor on way out it will drain battery had similar problem get starter checked
  16. From experience try cleaning it if works for a bit buy a genuine one I put aftermarket one on it ran like a bag off bolts genuine run like a dream
  17. phil sorry yes you got the correct fuel sensor if i was you i would not bother cleaning the maf sensor i had this problem with my 3.0 alphard best route is to replace the maff sensor they not exspensive put oe no. into ebay 2220422010 maff sensor circled in red in the drawing
  18. oxegen sensor and fuel ratio sensor are 2 different sensors
  19. fuel ratio sensor is the top one at the manifold bottom one is a oxegen sensor
  20. The sensor you had replaced is not correct part no. The correct part no. Is 8954228100 so that is more likely the reason the light is still coming on the part no. You had fitted is a oxegen sensor not a fuel ratio sensor you need to get the correct part fitted
  21. Maf sensor can trigger same code air flow sensor
  22. Phil do you have the part no. Of the sensor you bought from toyota
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.