Jeza

You can pickup the feed from the rear camera from a connector in front of the passenger seat next to the center console at floor level. Red and white video, black 6V power to camera and shield, this will save you a few ££'s. If you need a 12v trigger for the HU the loom in the passenger foot step has the thin red/white feed to the reversing lights, there are several red/white wires in the loom so a bit of work with a meter and sharp pin is required. The front camera I have yet to investigate where the feed comes into the cabin.

Hi, with the roof down you have about an inch gap between the roof and bed boards, as you can only stack the boards two high and close the roof on our conversion. The hollows in the rock and roll bed we fill with either a towel or small pillows and use a cellular blanket at present but have just purchased a couple of lightweight blow up sleeping mats to try.