Leaderboard
Popular Content
Showing content with the highest reputation since 08/16/2017 in all areas
-
Just received an fitted my new head unit from Aliexpress and I thought I would share if anybody wanted to get one. The one I got was this one - Car Radio For Toyota Alphard 2008-2021 Rhd Octa Core Android Car Dvd Gps Navigation Car Stereo Carplay Android Auto - Car Multimedia Player - AliExpress I got the 6gb ram / 128gb memory one as the price was cheaper then the basic ones in the UK. The unit arrived before the due date with all the cables. The only thing I have added in DAB USB unit which is easily fixed in (£28.99 on Amazon). Fitting was quite easy, however there are a few things to look out for. Mine was probably a bit harder because Micky Mouse had wired in a Sony after market unit so the wiring was all over the place. I found a few wires not connected to anything and these I deduced was connected to the screen aerials. I also had a phone wire that was sleeved with some other wires that had been cut. I assume the previous person thought it was for the reversing camera, but I am suspecting they go to the roof screen. I think I have found the reversing camera wire, but I need to order an adaptor. This was £25 on ebay. Once I had sorted out which was which it was easy fit. I did find a loose earth lead and when I connected it, the car started talking in Japanese. Ended up the earth was the wiring for Toll Road unit. The unit comes with two USB cables, one I used for the DAB adaptor, the other I ran next to the steering wheel, then added USB socket in the switch hole, to make it look more OEM. There is also a GPS unit. The cable is a bit short so I ran that to the passenger side of the window. It also comes with a 4G areal, which I have not mounted as I don't intend to pay for a data plan for the car, when I have unlimited data on my phone and can make a wifi hotspot. I booted the unit up, half expecting it to be the cheaper model or worse, not work at all, but it booted up great. It is very smooth and fast. I downloaded and ran AIDA64 to check that the specs had not been faked and it was exactly as it was stated. The steering wheel connection was easy to set up just by selecting the control then pressing the button on the steering wheel. Now the bad part. Changing over the gear selector was a pain as the original had pins that had been melted, these needed drilling then finding suitable screws to fit in the replacement bezel. I found some old screws from installing hard drives in a PC and these worked fine. Next the little storage unit in the bezel is a darker shade then the replacement bezel. I quite like it but some may not. I did think about wrapping it all in vinyl, but decided not to. Lastly I cant seem to get the top of the bezel to fit. I think there are some little plastic stems on the back that I need to file off. Other then that I am very happy. I have a connector that I think is the rear camera, if somebody can confirm it, that would be great.8 points
-
Not totally complete but almost. If you have any part numbers then let us know and we'll add to the list. 3.0 V6 & 2.4 Alphards Cam Belt Kit (Buy from a reputable seller as many cheap fakes available online) Blue Print: ADT37334 (3 Litre) 2.4 Does not require timing belt. Water Pump Blue Print: ADT39148 Oil Filter Blue Print: ADT32108 (3 Litre) Blue Print: ADT32112 (2.4) 90915-10004 Toyota OEM 2.4 90915-20003 Toyota OEM 3.0 90915-YZZD1 Toyota OEM 2.4 Hybrid cabin filter (for 5 speed) Blue Print: ADT32512 (2.4 & 3.0 Ltr) 87139-28010 Toyota OEM Air Filter Blue Print: ADT32279 (3 ltr) Blue Print: ADT37267 (2.4) Oil Petronas 5w /30 Fully Synthetic (ACEA A1/B1) (3.0 Ltr) or other quality Fully Synthetic oils. Coolant OATS Anti-Freeze Spark Plugs Toyota OEM: 90919-01210 (3 Ltr) Toyota OEM: 90919-01184 (2.4) Fan Belt/ AUX Belt Toyota OEM: 99366-31040 (3.0 Ltr) Blue Print: AD06R1036 (3.0 LTR) Power Steering Belt 99364-80880 OEM Toyota High Level brake light Bulb: 955 12v 16W Wiper Blade Sizes 26' Driver 16' Passenger Side Lights 501 ATF Transmission fluids. Highly recommend Opie Oils http://www.opieoils.co.uk/c-1432-atf-automatic-transmission-fluid-for-cars.aspx Make sure the specifications are for the Toyota T-IV ATF oil. Fuches is a good brand. Oil Strainer: OEM 35330-28010 (Transmission Gear Box Oil Strainer Filter Assembly Accessory) You can get this from Lindop Toyota Mail order from john.devlin@lindop.toyota.co.uk Auto Jap Spares do a Kit with Plugs, Oil Filter & Air Filter. https://www.ebay.co.uk/itm/123377568634?ul_noapp=true7 points
-
7 points
-
7 points
-
Great news! My Alphard just passed its MOT. To celebrate, I've created a tutorial video on how to properly install the rear fog lamp using the OEM stalk and relay. This guide is specifically for second-gen Alphards, but based on feedback from first-gen owners, the process should be similar. This project took me months of research and gathering information from various sources. Since I couldn't find a single comprehensive video covering all the steps, I decided to make one myself. I hope this video is helpful to the entire Alphard community. Please like, share, and subscribe to help spread the word!6 points
-
We have the complete list of wiring diagrams for up to the 2008 series Alphard both models. Same wiring on both the hybrid and non hybrid. SRS.pdf Smart Entry and Start System Wireless Door Control lock.pdf Smart Entry and Start System Steering Lock.pdf Smart Entry and Start System push start button.pdf Smart Entry and Start System - Immobiliser.pdf Smart Entry and Start System.pdf Seat Belt Warning.pdf Rear number 1 seat.pdf Front Passengers seat.pdf Drivers Power Seat.pdf Power outlet.pdf Internal Lighting.pdf Illumination.pdf Combination Meter.pdf Backup Light.pdf AC.pdf Door Control Wiring.pdf Parking Assist.pdf sound system.pdf6 points
-
Did some research. Toyotas OEM Wipers for the alphards used blades provided by nippons blade division called NWB (nippon wiper blades) For the 10 series, the fronts are 26"(650mm) and 16"(400mm), with rear being 16"(400mm) For the 20 series, the rear is the same, but the fronts are 30"(750mm)and 14"(350mm) NWB blades are coded D** (** is the 1st 2 digits of the size in mm, E.g. D75 = 750mm) and the rear is GRB40 The 'D' is their design range that use graphite coated rubber. You can buy their HDA or HDB range (the frames are identical, but the rubber blade is coated in varying qualities of water repellant material that coats the glass (better performance with frost/snow)) You CAN buy just the rubber inserts (check that your existing blades are the nippons ones, they should have a metal clip/rail that needs to be removed and reused - the rubbers do not come with this metal part) I bought a set from amazon.co.jp (you can create an account in English) Search term for 10 series is NWB D65 D40 GRB40 Search term for 20 series is NWB D75 D35 GRB40 You can also buy DENSO, which is a decent OEM used by Toyota. Their largest blade, unfortunately, is only 700mm(28") so if you have a 20 series, you will have slightly less coverage on drivers side. DENSO codes are DU-070R (28") or DUR-065R (26") driver side DU-040(16") or DU-35(14") passenger side And DRB-040 rear. For all these wipers, the passenger and rears are about £8 to £12. The drivers side, being much larger is about £22 to £26 These are hook fixings, so any cheapo blade of manufacturers wipers will work if you get the sizes right. The rear blade has a different connector design, so probably best to stick with the NWB or DENSO designs. Opieoils (linked in a previous post) is very competitive of you are buying the denso blades, but you will be limited to a mac size of 28" If you still have the original NWB (Nippon) blades fitted, you can save money by buying the rubbers only, from Toyota, or amazon.co.jp6 points
-
6 points
-
Bulb List for Gen 1 Dashboard/console led/bulb = t4.7 for the backlight of the clock etc and t3.5 for the buttons Buttons either side of steering wheel = T3 Headlights - Halogen Headlights = H4 60/55W Discharge Headlights - High Beam = HB3 60W - Low Beam = Not fitted with intelligent AFS = D2R 35W Fitted with AFS = D2S 35W Front Fog Light = HB4 51W -mz * mx * ax = 55W - MS * AS = 35w Clearance Lights = W5W 5W Front Indicator/Hazard Lights = 1W Side indicator/hazard = W5 12V Number Plate = W5W 93R Brake Lights = 21W Tail Light = 2DIW SW7443 21w Rear Indicators = 2FH 21W Reverse Light = W6W 21W Rear Fog Light = 21W optional change to the reflectors HERE Front Personal Light = 8W Rear Personal Light = 5W Vanity Light = 1.5W Front Door Courtesy Light = 3.8W Foot Area (not present cant tell you) = Luggage room light = 5W Ashtray = 1.2W High mount stop light =W16W 16W Bulb List for Gen 2. If you have a Gen 2 please message me and I will update the list. If i'm missing any them let me know too. Thank you5 points
-
Hey everyone, I successfully did a full radio upgrade in my 2007 MZG, it was hard to find any info on how to, so i hope this helps someone in the future. overall it was fairly easy. I used the beatsonic harnessess for the entire install. I used the SLX-131 from car audio express in the UK, if you get the steeringwheel package it already comes all wired up and ready to use, they also include the radio side adaptor which you configure yourself with the guide included, you do not need to buy any extra radio side hardness. This kit also came with the dash kits and everything needed. Beat-Sonic SLX-131 Audio Adapter for Toyota Alphard (caraudioexpress.co.uk) Wiring of the SLX-131 was very easy, its all plug and play, just get the right plug connectors, and everything plugs in. You only use the front L & R speakers from the radio side harness. You dont need to hook up the Ant Rem either unless you have a remote antenna. For the front and rear cameras you will need BC1 and BC15. These two kits install under the passenger seat, there is an ECU there with a 40 pin connector. You will need to run ACC+ and two RCA lines to under the seat. I was lucky enough that the car had previously had the TV module installed under the passenger seat so I had ACC power already available. You will hook up the BC1 in the front camera configuration, with the purple going to red. I ran the two RCA cables just under the floor mat to under the glove box and then up through the dash to the new radio headunit. Beat-Sonic BC1 Rear Back Up Camera OEM Interface Adapter (caraudioexpress.co.uk) Beat-Sonic BC15 Reverse Camera Adapter for Toyota (caraudioexpress.co.uk) I used the Pioneer DMH1500NEX headunit for the replacement radio, overall it works fairly well, but doesn't have wireless carplay, and they use their own OS which is fairly limited for videos. It is Web Link compliant, so I can watch YouTube and app store videos on the rear and front displays. The rear display also is working, but with this head unit is fairly limited on what i can play. I would definitely recommend getting something with an android OS for more video flexibility if thats what you want. You may also want to consider a unit with HDMI input as well if you want to have more video input options. I will upload a video on to YouTube at some point as well.5 points
-
I was recently in the market for a 20 series Alphard. Being in Dorset there was not a lot of choice and was not keen to travel many miles all over the country to look at Alphards. I had to shortlist some of the vehicles I liked, then shortlist them in order of interest. This helped me source the car that interested me the most. When sourcing through dealers you have to try and spot any cover up's. Looking around the car with a fine tooth comb. There could be a whole bunch of cover up's or maybe it really is a clean car. This will usually depend on the dealer and if his auction agent in japan is a dummy and cannot spot a good car or is only looking for the cheap cars that can be easily fixed up in the UK. A good reputable dealer will have a good reliable agent who knows his beans and only provide the best cars, but as always there are some unscrupulous dealers will buy cheap imports so do up and flip for top money. Please note, there are many very good dealers, but there are also a few bad apples in the applecart In the past I have purchased a number of imports. I am not an expert by any means but I have picked up enough things I would need to be looking for when buying a Japanese grey import, and here is a list of things i would look out for. Note: even though this list is quite extensive, buying a Jap import is as much work as buying a used car but just requires some additional research on it's past. Don't let it put you off because these cars can be a real pleasure to own and practicality side of the car is amazing. So don't be put off. The Car Exterior: Check all the panels for any paint discolouration, dents, scratches, swirl marks or creases etc. The likelihood that if you have a few of these then the car auction grade would be tops a 3.5 (out of 5) exterior auction grade. A auction grade 4 would be maybe a small tiny scratch, pin dent. a 4.5 Grade is Showroom condition. See my Chart below in the paperwork section. Check sliding doors open and close on their own, sometimes these can play up as they need lubricating. Insist they lubricate and show you them working properly. Usually a simple job but if they are not then can be timely and costly fix if it's got a dodgy cable/belt. But usually it's just dry from being on the ship to the UK for 3-6 months. Silicone Spray along the runners does the trick. Check boot shuts. If a power boot then makes sure all these shut on their own and if it has soft close doors they all pull tight. Check Sunroof open and close, check for rubber cracks Faded Headlights: Bargaining tool as these can be polished clean if they look yellow and faded. A lazy seller won't polish them. Check all light bulbs are working Wheels - Check for bubbling or scrapes. Good bargaining tool. Check for spare tyre under the back of the car Check under the car for dents, scratches, damage or signs of corrosion (cars from the north Japan have a different climate to the south) also check for welds or even new components recently fitted. If the car has been undersealed then ask why that was, is it covering up something?? This is a £200-£300 job which not all sellers want to pay out. Check for zero rust (things like exhausts, hubs, brackets, bolts light surface rust is normal. But you want to see painted body panel with absolute zero rust) check brake disks for lipping around the outer edge (do when brakes are cold) Also check to see if there are any meat on the pads if you can (usually an MOT would pick up on the pads or very badly lipped disks) Tyres - check the depth of the tyre from side to side. important to check the age of the tyre (see pic below 4718, this means 47 denotes the week in the 52 calendar month and 18 denotes the manufacture year) ideally you should look for anything below 5 years old. Also check for winter tyres against summer tyres. Again another bargaining tool. Under the bonnet Check for Zero rust on the painted panels, strut mounts, or anything thats painted. Check for oil or fluid leaks and look for anything split or perished hoses. White powder build up around the end of the hoses can mean a slow coolant leak. Check engine oil and look for golden to dark golden brown oil (black oil is not something an Alphard should have) check under engine oil cap and make sure it is clean check engine coolant is pink / red water and is clean like a good ol' glass of Rose wine! Check Battery terminals and the battery has a fixing mount (check battery does not move about or could cause fire) Also if the battery has a check inspection window, check the battery health Check brake fluid and PS Fluid. Check under car oil sump for leaks Run the engine, should sound silky smooth. There are many sounds that can come from this area so it would be a difficult to explain here. But loud ticking, grinding should be questioned and seek additional advice from a competent mechanic. check for belt sound, squealing, chirping, whining. Interior: Check seats all fold and work and the runners work. Good idea to play around with these to ensure its all tip top. Check for wear and tear on seats. No rips or holes, Fag burns are a bargaining tool. Check mats are all intact, these sometimes get stolen in auction and end up on ebay Check to see if car has been smoked in, Smoking is more common in Japan so sometimes they interior will show. Usually a dealer will cover up the smell with fabreeze. So depending on how bad it is either use as a bargaining tool or put up with it or do not purchase vehicle at all. You will smell it after a while. check seat belts are intact, no rips or stitched belt (usually a proper MOT would pick this up) check for any missing trim pieces (not the end of the world but good bargaining tool) Check Odometer and speedometer has been converted properly to MPH (this is an easy fitting so don't let the dealer get away with not fitting it, because it's a pain without) Check radio has had band expander fitted (not end of the world but good to get it fitted) Check dash buttons work, Ashtray closes properly (these break) and stereo works, including touch screen (yes sat nav will be just a blank screen) Check fog light and button all work (MOT would pick this up anyway, but best check) Check all electric windows check all door locks and all central locking operates as it should. check all interior lights check AC works including rear AC, Alphards have a front and rear AC and check all vent give nice cold air. Could be costly if not. Check windows from inside for ripped tint or scratches (bargaining tool) check electric mirrors (if electric) check electric curtains (if any) check cameras (if any) check CD/DVD (if any) Test Drive Does the car have at least 2 keys that open the doors and start the car? (expensive to replace!) Check to see if the car drives in a straight line and drive straight under slight acceleration (try and finding flat road with little camber) When safe to do so, press brake pedal hard to see if the car wants to pull to one side. Car Should stay in straight line Run car up through gears and ensure it changes gears from 1st to 4 or 5 (depending how many gears it has) and back down with no jolts. Check acceleration, does the car drop a gear relatively smoothly check for knocks on a bumpy road, knocking felt though the steering Check for rear knocking (common issue with rear axle mount bush) When you have come to a stop, check footbrake. try slight acceleration around a bend to check CV joints are not worn or dry check power steering Check not dash warning lights showing. (it's not xmas yet) The Paperwork Checking through the log book to make sure its a fresh import and no previous owners. This is not an issue if you are aware thats there was a previous UK owner. With the reg plate, check to see if there was any advisories or failures on the MOT. Any issues should be shown as fully repaired and no advisories were left for you to sort out. Check the MOT here: https://www.gov.uk/check-mot-history Check that all the import duties on the car have been paid by the dealer or seller. Check the Auction Sheets. Ideally the original auction sheets but if not then a CarVX report will show you this. You need to check that there is not an R in the top right corner of the auction sheet. Any signs of an R grade then you should walk away. However, there has been instances where the original sheets were altered, then photocopied to hide these. Take note on the VIN number, Photograph this as you will need it for your CarVX report. Does the car have any past history paperwork, rare but I have seen past documents lovingly packed in the car service book. A testament to a good previous owner. This also verifies the past mileage and work. Some cars come with service stickers inside the door pillar or under the bonnet can give you an indication of past servicing and when it was last serviced. (beware, some dates may be shown in the Japanese calendar and not a Western calendar) So always check to see if these are on the car at all. Does the car have any outstanding recalls. Yes even a 15 year old car can be recalled. Toyota will repair them as well, but there is a process for this shown on the club forums. Below is a chart of auction grades Auction Grades S or 6 – Brand New 5 – As new but used 4.5 – As above with the most minor of blemishes 4 – Excellent Condition 3.5 – Minor Marks and Blemishes 3 – Noticeable/Heavy marks and Blemishes 2 – Poor condition 1/0/-1 – Very Poor condition OR modified (and quite possibly in excellent condition) R/RA – Accident Damaged/Repaired Vehicle The Japanese History I would be looking at getting a CarVX report before purchasing car, you can put down a returnable deposit with the dealer and if after all your research the car comes back with a bad report, then you can get your deposit back. You need to negotiate this with the dealer or take the risk and hope the car does not sell in the meantime. Some dealers offer certified mileage guarantee. This is all very well but highly recommend doing your own homework, the CarVX report will give you all the information you need (apart from service history) and show you all the auctions your car has been in, the photos of the vehicle, Auction sheets and inspections throughout it's life. A vehicle inspection (shaken or JCI inspection) is a compulsory inspection for all vehicles on the road in Japan that must be conducted every 2 years. Also the report will show you Title problems Vehicle registration Accidents / Repairs Flood damage Odometer problems Airbag deployment Recalls Safety rating Detailed technical data Average market price Manufactured date You can see an example report before purchasing. How to get the report: CAR VX - Japan’s First Vehicle History Reports Service Disclaimer: Please note, the club does get a small commission for each report sold. Insuring Your Alphard We have made a list of Insurers who will insure Alphards and Vellfires. Take a look here Tip: I have seen many owners who claim they have a 7 Seater Alphard and really it's an 8 seater. Once easy way to tell is if the car has 3 seats in the centre row then its an 8 Seater. The very rear row is actually a 3 seater, hard to believe but it is. I would also like to note that these owners also insured their car as a 7 seater when really it should be 8. Tricky if it came to an insrance claim, so please ensure that the car is registered with insurance and DVLA properly. Final note: You should seek professional advice from a competent mechanic when viewing a car. The article above are just tips what you could be looking out for. This is not advice and you should only use this tips when looking to buy a car at your own risk. I cannot be held responsible for any damage or losses caused. Basically, please don't come to me if you get it wrong. Thanks5 points
-
what worked out well was we all seem to turn up at the same time, we then were directed to the wrong carpark, so we have to come back the way we came out and we were all passing each other, it was a great spectacle to see. Then we all queued down the hill to line up. It was ace! Thanks to everyone who came and hope you all got home safely. See you in the spring at the next meet.5 points
-
I'll start this by saying I'm not a mechanic (I'm actually an accountant). I do have my own lift but would be more of a tinkerer than anything, so my techniques may not be best practice, but it got the job done. One other word of advice is that even though these were not clunking, nor even mentioned on a recent MOT I decided to go ahead and replace now BEFORE corrosion had a chance to take hold. As a result, using the right tools, this job took me, a novice, just over 3 hours. The offending bush: First job after removing wheels and getting the vehicle in the air is to unplug wheel speed sensor in the rear hubs. Loosen & remove 10mm brake unions both sides. There are four in total, however I only needed to remove three. The drivers side handbrake cable routes under a hardline which is bolted to the axle. When you swing the axle down the axle will effectively hang on the brake cable held up by the hardline, so undo this now to stop this from happening. I plugged all lines to stop fluid running everywhere. Unbolt handbrake cables and wheel speed bracketry on rear axle. Remove level sensor on rear axle, passenger side Double check you've nothing else bolted to the axle that would prevent it from swinging down. Next job is to unbolt the bottom bolt of the rear shock. Take the weight off the axle, remove bottom bolts both sides and this will allow the full assembly to rotate down. Caution: It's heavy!! Rotate enough to allow you to remove rear springs. Remove springs and set aside and then raise the axle back up and loosely bolt the shocks back in. At this stage you could, if you wanted, take the handbrake cables off altogether and remove the entire axle. It's unnecessary in my opinion but bushes might be easier removed that way. Next is to remove the bolts for the rear bushes. Once loose both sides the axle will want to fall down so ensure it is supported and lower it gently taking care that you haven't missed any connected pipes / wires / hoses, etc Once it's lowered enough you have access to the bush. I used a Nielsen tool for this job. It wasn't explicitly advertised as fitting an Alphard but turns out the leaflet in the box confirms it'll work. Neilsen CT5516 is the kit you want. Attach tool to bush, clamp and turn the bush out. It's hard work but the tool did the job. Remember to note orientation of original bush! And with some effort the old bush is removed At this point I cleaned the inner surface of the axle with a little steel wool and then applied a smear of corrosion resistant marine grease. Then, using the same tool, press the new bush in And in. Building back up, is, as they say the reversal of disassembly bar the exception of bleeding the brakes. A good chance to renew the fluid. I also ended up replacing discs and pads. I hope this helps someone. It's not a particularly difficult job with the right tools (and a lift). I would feel confident tackling this on the driveway provided I was able to get the vehicle high enough in the air. My axle bush tool will be for sale soon if anyone's looking one. Ideally we could have a group rental set-up but I don't know how to organise that. Craig4 points
-
So, here we are safely moved from the wilds of Argyle & Bute to chilled out East Dunbartonshire. 10 mins along the road a garage was found for van MOT, passed with minor comments. Advised a Velfire in the area also frequents said garage, maybe a group will be formed! New gaff a big improvement, excellent dry garaging for bikes & van fettling. Surrounding countryside a bikers joy. Life is good 😎4 points
-
So.....had the misfortune of breaking the passenger mirror glass on the Alphard. Thankfully the mirror housing and folding mechanism itself is fine, just the glass dropped off the plate and wasn't salvageable! Anyway, trying to drive a vehicle the scale of the Alphard without a passenger mirror is no fun so I quickly looked into sorting it. As bad luck would have it (unless I was being daft) whilst there seems to be a proliferation of AH20 glass on the likes of eBay, but not AH10 which was frustrating. I did pop down to Halfords and they didn't have anything either, though their booklet seemed to suggest a part that could be ordered in. That glass it transpires is actually for a later model (2000 to 2006) Previa/Estima, and not for the Alphard specifically. I tried one of these cut to size temp mirrors from Amazon, absolute garbage and regret even trying. Definitely don't use one of those. Off the back of the Previa/Estima thing, I ended up taking a chance on some Previa glass from Amazon, which turned up next day and wasn't a great deal more expensive than the temp solution . Needless to say it's not a perfect fit, but it's the right shape to go into the backplate without any 'oversize' issues and can be mounted so that the loss of mirror area is minimal. So, if you are ever in need of mirror glass, need something temporarily/are happy to live with something that's not perfectly shaped I can confirm the 2000-2006 Previa/Estima glass is usable and a good solution - assuming you still have the mirror backplate (i.e. have only lost the glass!). I've ordered a new genuine replacement from Amayama, at rather extortionate cost, and I guess it will arrive eventually, but there is a temporary/permanent solution there if needed if anyone finds themselves in the same boat. I also learnt something very useful in the process.....transpires my MOT had lapsed somehow over the bank holiday weekend (no reminders unfortunately) so it also needed MOTing, which I thought ironically was just great given the mirror problem. However, transpires (and this is quite a recent change) that as long as the vehicle was first used/registered (whatever) before January 2010, you can pass an MOT without even an advisory with just the drivers and interior rear view mirror, the passenger mirror is still not required (believe it used to be anything after 1976 was covered but not anymore). Therefore, the passenger mirror for us lucky AH10 owners is just for vanity, just make sure you don't break your driver's mirror around MOT time!4 points
-
Hi, piece of information if your front sunroof ( the one that only lifts up 3/4".) Leaks slightly... Had this happen this morning, it was closed during a heavy down pour overnight and the roof lining was slightly damp towards the front part of the sunroof aperture. It took a couple of hours to find the best way to remove the glass sunroof and check the seals and ensure the drain holes were clear. I discovered that these vellfires/Alphard designers are literally at the top of their game. It would be easy to remove most of the front edge of the roof lining to find a way to remove the glass roof, remove the sunscreens, remove the interior lights and grab rails, it's not necessary ! The front edge of the roof lining that meets with the front edge of the sunroof has a velcro attachment ! Pull it gently and it will come away and reveal the 2 X 10mm nuts that holds the front edge of the glass sunroof in place. Remove these and you can lift the glass front edge up to reveal the 2 front drain holes. Mine had mister spider hiding in the left one, causing it to block and fill up, clear him out with a length of wire and put it all back. Job done, took me 3 hrs, but with the above, its a 30 minute job.....4 points
-
I am in no way affiliated with them, but I just wanted to let everyone know that I've just had some great service on my 2007 Hybrid from a garage near Cambridge. It was having loads of issues, kept cutting out, hybrid system stopped working properly, overheating battery etc etc and I hadn't been able to find anyone to help locally to even diagnose it, let alone fix it. No one would touch it! BUT, I took it to Cambridge Hybrid Vehicle Specialists (DAG Group), who diagnosed and fixed the problem in under an hour for less than £140 including parts and labour. (Turned out it was a couple of fuses and a broken relay causing all the problems.) Nice guys, seem to really know their stuff, and they've just opened a location here to get ready for the new taxi rules that come in to effect in Cambridge in Feb next year, and apparently they service fleets of over 800 hybrid cabs in London and somewhere else I forget. Anyway it was a nightmare finding anyone who could look at it at all and they were great, so I just thought I'd give them a shout out on here in case anyone else is looking!4 points
-
Those who have hunted will know, finding a towbar for a the 2008 onwards Vellfire / Alphard isn't easy. You can order a "Suntrex Tugmaster" towbar from Japan, but they are best part of £600, plus shipping (£200), plus duty and VAT.... its over £1000 to your door Or you could fabricate something from scratch if you are that way inclined. But what I found was the Lexus RX300-400h tow bar from Witter is nearly a direct fit, but some modification are required. Part number TY135BU First the main beam across the back is 1090mm long, and it needs to be reduced to 990mm end to end. Simply measure 50mm from each end, mark it very accurately, then slice it with a slitting disc. Clean up the end plates and re-weld them back on. Then I made up two flat plates to sit on the inside of the boot floor to act as a load spreader. And 6 spacer collars I made from some 20mm steel bar, that I drilled out with a 12mm bore for the M12x125mm bolts. These need to be exactly 81mm long. I made them on a lathe. If you do nice job of it, you end up with a towbar that looks straight out of the factory, with a branded e11 type aproval sticker on it 😂 Strangely, one of the bolt holes lines up perfectly with one of the factory holes and floor indentations. You only need to drill a couple of holes for the bolts. Spare wheel still fits perfectly. All looks like a proper one, whatever that might be. Keep in mind the photos are mostly during the mock up fitting so the bolts haven't been tightened up.4 points
-
Inspired by paint jobs seen at Gaydon, I have just had the lower third(ish) wrapped with "Anthracite". Soooo pleased with the result - it really enhances the van IMHO. Cost was £700 and it took 2 days. 5 hours just for the front bumper due to the contours. I checked with insurance (A Flux) and no extra cost to the premium. Got to show it off, please forgive my indulgence! Here are some pics:4 points
-
Hi all. Just dropping in to say hi. Great site. I've had an mz for 4 years so have made a lot of videos on my repairs. Feel free to subscribe and watch the videos as they are uploaded.4 points
-
Since getting my 2008 AH10, the drivers side wiper had always skipped. The initial sweep was fine, but the return used to miss/skip over a fair section of screen to the point it was quite annoying when it rained/you washed your screen. I initially put it down to the blade being bad (as they were the old frame style and clearly quite old) but changing it out (from the old style to aero blades) for a new one of the same 26" length it still skipped. I figured it was either a weakness in the arm or perhaps some distortion of the screen. I'd just lived with it up until now, but having recently had my windscreen replaced and it doing the exact same thing with fresh glass I thought I'd try something. I replaced the original AR26U Bosch blade for it's 24" equivalent, figuring that the loss of an inch of wiping either end of the blade wouldn't be a huge loss it would be worth a try to see if the skipping stopped. Well low and behold it did. Now wipes perfectly with barely any difference in coverage. Therefore if anyone experiences the same thing, can almost guarantee switching the driver's blade from 26 to 24" it'll sort it. Certainly cheaper and less problem than trying to source a new wiper arm!4 points
-
Hi Guys I just wanted to share pictures and details of the Vangear mini pod I just brought and installed in my Alphard. There were some members who were interested in this so I thought I'd start a new topic. I ordered the unit about 3 weeks ago and requested they fit an extra rail for an additional table I wanted. I had removed one of the rear seats and placed a plastic mat before fitting the pod.. which took about 20 minutes to fit. I've placed all my utensils, ridgemonkey, camping bits in the cupboard and behind the unit. I have enough space under the table to put my Thetford loo and my poweroak power station, with space on top to put my stove, picnic rugs and blankets etc..My 30L fridge sits on top when I'm parked up. The only issue I had was that the leg for the table facing the tailgate was not meant to be long enough to reach the floor outside. I instead used an extended tent pole which I already had.. this was perfect. The pictures I've attached were taken when I fitted the unit. I placed all the above items and more in and around it afterwards. This still give me the use of 6 seats 😀 I can remove the whole unit and bolt back the seat in 40 minutes if I had to. It's a brilliant unit. I hope this inspires you all to get out and to enjoy these brilliant vehicles. Aftab4 points
-
4 points
-
4 points
-
I don't know if I am way behind some of you but I couldn't find anything on the forum regarding Identification of correct Toyota parts for the Alphard, or what to do if you are really struggling to get hold of a specific part from UK. But I have used the below mentioned link to find parts specific to my model from time to time. I have even used this website to order a part from Japan, and the Company - AMAYAMA were very professional and packaged my delicate part really well for the journey. It arrived in perfect condition. You can insert your precise VIN into the box and find any part number/ exploded diagram of all systems, prices of alternative non-original parts and more. You can look up parts from any car from Japan, and I have found it really useful over the last 8 years since I first bought a JDM car ( now on my 5th - have 2 at present ). Once you click on a part number, it takes you to the AMAYAMA website where you will see a photo of the part, and prices in U.S. $. Have a browse - info is almost all in English. https://toyota.epc-data.com/alphard/4 points
-
Hi. Managed to track cause off fault Broken link arm on rear axle offside for levelling headlights repaired and afs fault gone. Thanks for all your help and advice4 points
-
4 points
-
4 points
-
As promised:- Picture one and two show how neatly the rail fits out of sight,three and four the rail fitted. Five is how the awning porch rope fits to the camper using kadance strip and figure of eight joiners. Components from Right to LEFT:- Awning rail, Kadance strip, Figure of 8 joiners and a scrap length of "K" strip in place of Awning porch rope. The process is to site the camper and if using a "blow up" awning, slide the "K" strip along the camper rail [I punched and sealed a hole in each end to feed a piece of cord to easily pull the strip along]. Erect the awning close to the camper,wriggle the awning to the right distance from the camper and using the figure of 8 joiners, join the awning porch. to the "k" strip. The length of awning rail I used was 2.2m to ensure the strip fitted UNDER THE TOP WHEN LOWERED. The rail will need to be curved slightly{although not too important as it is not seen when top down or awning fitted],] as there is a slight compound curve in the roof. As I was going to use S/S self tapping screws I pre-drilled clearance holes in the rail. Whether using adhesive or drilling as well THIS IS THE TIME YOU POSITION the rail as close to the pop top brackets as possible and check the rail fits evenly when top is down it, stick it in position with double sided tape and mark along the back edge with a marker pen, removed the strip and tape, carefully squeezed sealer/adhesive in front of the marked line and began drilling[or not], into the roof with correct drill for self tappers, putting a dab of sealer in each hole before the scews. The figure of 8 joiners should come with the awning. Hope this helps,or if anyone thinks I've missed out any info please let me know ASAP.4 points
-
Here's my 2p worth ! When driving an automatic and coming to a temporary stop, it is not necessary to take the transmission out of drive, just apply the footbrake until you are ready to go again. This reduces wear on the transmission. When about to set off again on an uphill section , SWIFTLY move your foot from the foot brake to the accelerator and apply a few revs. No rolling back occurs when done with confidence. The transmission has a pawl which engages on selecting PARK, but this should not be used as a brake, and PARK should really only be selected AFTER you have applied the hand(foot)brake. There is is a risk of expensive damage in an auto transmission if you abuse the PARK facility. If you don't believe me, check out a few Scotty Kilmer videos on YouTube. He knows a think or two about cars, and Toyota in particular.4 points
-
On any gradient, I just hold the car in place using the foot brake. I leave it in drive - only manuals need to be put into neutral. When I want to pull away, I just move my foot to the accelerator. It doesn't roll back. First time you do it is a bit scary so try it when there is no one behind you.4 points
-
Here's a datasheet on the anti-corrosion measures in place on 2008 onwards: m_bo_0012.pdf4 points
-
4 points
-
My van previously had a swing out bracket that held a table but it was missing when I bought it. I looked at what was available on ebay and found they were all quite small and expensive so I thought I'd knock one up. Found a cheap 70's formica coffee table(lightweight 12mm ply) locally for £5 and bought the fiamma tripod base, pole and table mount(expensive) which is now used by some conversion shops because they give the added advantage of being able to rotate it and take the table out the van and use anywhere, while folding up flat for storage. I put on some cheap vinyl I got online(£7) and some 12mm knock on T trim(£12). Routered the groove round the table top which was a doddle and fitted the edging. It's very stable on rough ground and fits the van perfectly. It's 100cm by 45cm which is a lot bigger than some others I've seen.4 points
-
Hi All, I've recently taken delivery of an AH10 and decided to fit a mph speedo dial as my first project. Unfortunately the instructions from Lockwood on removing the old dial aren't very clear so I've made a short video of the steps involved and posted it on YouTube.4 points
-
I've just had mine converted by funky ram in Bristol (Avonmouth). They were brilliant. Took a bit longer than expected but supply issues and covid meant that was inevitable really. Fit and finish are awesome, and it was a good chunk cheaper than most of the others. They're pretty new to Alphard conversions but I really can't find fault with the work. Upholstery in particular is amazing. Team are really helpful and friendly. Highly recommended. I've got a full side conversion with pop top.4 points
-
Hi all, well we are now happy owners of our side conversion, pop top with the wider 120cm bed Alph. We chose Calder Campers in Livingstone, and whilst nowhere near 'local' for us, we liked the way they did things. We went for the side conversion, as this suited our needs, and also went for the wider R&R bed (wasn't aware this was available and was offered by Calder), which again suited our needs. We found our vehicle beginning of June - 05 3.0 V6 with low mileage and was spotless outside and inside. We chose our interior fit out, colour, style, seat covers etc on our 2nd visit, which they 'preferred' we went in person to do. Looking back, this was very much the best option, as we changed our minds about 4 times lol. Angela was brilliant in helping us choose the final options, and have to say got it right. It then took about 5 weeks to collection, and picked up end of August. I am now going to be a little critical of them when it came to collection....... I am fairly sure that before handover a proper PDI was not done, as the interior was 'grubby', the new front seats had stains on them, and the trim around the units had a couple of 'chips' in them. The curtains behind the passenger seat had holes in them (yes they were replaced immediately). The table leg literally came apart in my hand, as the screws barely pierced the table top (and were fixed with more substantial screws there and then) In our opinion, quite major in terms of handover, and if were honest just took the edge of it. The next major issue we encountered (but not till we got home), was the awning rail we paid to have added on. We were told it was 2.6l, but was only 1.7, no use nor ornament, so we had to return to Livingstone to have it fitted to the correct length, which CANNOT be 260. The max we got was 2.2, better, but when youve already bought an awning with a 2.6l.....does make it a bit harder. The rails themselves have to fit inside the pop top (which makes sense), and as the front of the vehicle slopes downwards, isn't able to take the rail. Yes, they sorted it (and compensated me for my petrol) but again, left a taste. In terms of the quality of the fit out though, we cannot fault them, it has been done very professionally, and the units are solid and look great. The re-cover of the seats/R&R bed is also excellent, and cannot fault it. From start to finish they have been helpful, gave great guidance on what we wanted/couldn't have, so no complaints there. Also we have a 3 year Guarantee on both the fit out, and the vehicle, so some peace of mind there. Would we recommend them, despite the issues mentioned - YES definately as the quality of the fit out is 1st class. HTH4 points
-
Note: No special tools are required to carry out the task except for general workshop and hand tools. Note: Disconnect the battery negative terminal before commencing work on the engine First step is to loosen the Right-hand Front wheel nuts, raise the vehicle on that side and support on an axle stand. Undo the wheel nuts and remove the wheel. Remove the plastic undertray at the lower part of the front bumper and also the one covering the auxiliary drivebelts under the wheel arch. Remove the auxiliary drivebelts and place aside if reusing, although if worn, then replacement at this stage would be the sensible option and cost effective in the long run. Tip: keep the old belts (if still serviceable) in the boot as a spare if needed in a road-side breakdown situation. Remove any electrical connections that are in the way and pull the loom in towards the engine and secure with a Bungy strap. Next, you are ready to remove the top engine mount. Before proceeding, it will be necessary to support the engine by placing some wood between the trolley jack and the sump and gently raise the jack until the wood is just contacting but no more. Remove any bracketry to gain access to the timing belt covers. The engine stabiliser bar is okay to be left in position or pushed over towards to the rear of the engine. Loosen the crankshaft pulley bolt and undo a couple of turns. Using a suitable puller, slightly withdraw the pulley from the crankshaft, remove the bolt and then fully remove the pulley. Once the upper and lower covers are removed you have then revealed the timing belt. It can be a fiddle to remove the alloy engine bracket (use a female torx socket to remove the studs) Replace the crankshaft pulley retaining bolt and tighten. Now you are at the tricky stage of timing up the engine prior to removing the belt. This is a good time to have a short comfort break because the next stage will require some concentration. Rotate the crankshaft pulley in a clockwise direction until all of the notches in the pulleys and castings are in alignment (see diagram). The camshaft pulleys should now also align with their respective timing marks. See diagram (below) for more information on the alignment marks. Slacken off the tensioner and remove the timing belt. Remove the tensioner, guide pulley and idler pulley. At this stage, it would be prudent to replace the water pump as well as this is also part of the timing belt setup and if it starts to wear on the bearing or leak then it can compromise the engine durability and it is the additional time to replace it at a later date. Bear in mind, the bearing in the pump has also done the same amount of work as the other bearings! On reassembly, it would be wise to use a thread locking adhesive to ensure that none of the fasteners loosen of with vibration from the engine. This should be applied sparingly to all crucial nuts and bolts within the engine. When fitting the new tensioner, ensure that the retaining pin is still in situ. This must only be removed once the timing belt is in position and the tensioner can then apply pressure to the belt. The belt should be positioned so that the timing points are still aligned and when you are happy, release the pin. Check camshaft and crankshaft pulleys are positioned correctly then turn the crankshaft two complete turns (760 degrees) in a clockwise direction. The timing marks should still be aligned correctly. A final tighten and check on all components within the timing belt area and you are ready to replace the plastic covers and rebuild the engine in reverse of removal. Remember to apply thread lock to all vital fasteners. Ensure all fasteners are torqued to the correct setting and refill cooling system (if drained) When starting the engine for the first time, it should be allowed to idle for a period to check for noises and leaks. Always a good idea at this stage to recap all of the work carried out and ensure that everything has been fitted and tightened correctly, including wheel nuts!4 points
-
You can see how the wiring is done in the parts catalog https://toyota.epc-data.com/alphard/4 points
-
xtrons, pumpkin do good radios but there are a few ebay listings that do the car radios. However i'm currently researching about a firmware update on the radios which i can then change it to english or at least put a english version of the radio software on. (still around 6 months away as i'm waiting on Toyota Japan to release the firmware code for me.)4 points
-
3 points
-
Hi Nicol, I had exactly the same problem with my freshly imported hybrid alphard. A yellow exclamation mark in a circle warning light appeared on the dashboard so I took it to a local garage and they were absolutely sure it's the worn break pads that need replacing. After they replaced them for £250 the warning was still there. So I plugged the car into a diagnostic app trhough the OBD2 port (I don't remember the exact error message) and did some googling and everything suggested that the problem is most likely the break capacitorm, which is exactly in the place behind the little grill which @smurf posted. I found a used one on Ebay for about £20 so it was not much of a risk if it wasn't it. And it did the trick! After replacing it, the warning light disappeared and it never came up again. The only problem was that the place where it is mounted is a bit awkward to access. Good luck with it!3 points
-
Hi. I have a 2008 Vellfire AH20. I've mentioned before, and it has been mentioned by other people about the height of the rear door, when open, being too low. My struts went up the the fully open position if lifted, but wouldn't lift themselves all the way up. Time for a replacement! Had a look on the internet and one company sent the wrong ones; too short and no brackets, even though recommended for Alphard/Vellfire's. I hot a refund in 4 days and had ordered a new set that looked right (showed brackets, etc). These arrived yesterday. I fitted them and they fitted perfectly! The cylinders ar shorter, but the close ok and, FOR THOSE WHO COMPLAINED THAT THEY BANGED THEIR HEADS, they open the door about 2" to 3" higher!!! They lift the door as soon as you unlock, but you can still pull down and shut easily. I'm really made up with them! The make is 'XIANGSHANG'. THESE WORK WELL and are highly recommended!!! (See attached pics) You don't have to bang you head again!!! John Harrison. Wallasey3 points
-
The side doors have a soft close motor, regardless of whether they are power doors or manual only, so this might be the sound you are hearing? Basically, it is so you don't have to slam the doors to get them to close, you just gently pull them shut and the motor pulls it tight. There is also the same on the boot lid. As regards the engine rust, the vehicle is nearly 20 years and will have been through many heat cycles and wet weather. A bit of surface rust is to be expected on steel that has been subject to the elements over a long period and is nothing to be concerned about. Likewise, oxidation on on aluminium is no big deal.3 points
-
Hi, welcome to the world of Alphard ownership. Due to the age, if there is no record of a cam belt change then get it done along with the pump and tensioner, best to do a full service oil & filter, spark plugs, cabin filter, air filter, aux belt. The engine is non-interference so no major damage will be done if the cam belt goes awol. Fog light; Option 1, replace the reflectors in the bumper with led lights and wire them up as fogs, you can get them on amazon Option 2, convert the offside reversing light to a rear fog with a red lamp, just make sure that the lens next to it is not a brake light Fog switch; you can get one off ebay that will fit into the switch openings in the dash and pick up the power from the loom behind or use a piggy back fuse off the fuse box in the drivers footwell, make sure its a switch for a Series 10, 2002-2008 Check the wiring loom behind the bumper as you might find that there is spare connector that could be used for a fog light, the cars used on the north island of japan had fogs fitted and there was also an option of a winter pack, toyota have a standard loom that just means connecting up items when specified Parts of the car are galvanized but it's best to get it under sealed. With a lanolin based underseal like lanoguard, lanoshield etc you do not have to mask off any rubber components as it will not rot them unlike the oil based under-seals, also being clear it does not "hide" any problem areas. Speedo/Odometer: Option 1: You can get replacement dials from Lockwood International that read MPH but leave the odometer clocking up in Kilometers, they are fairly easy to change and there are guides on the Lockwood web site on which dial for your model and how to change them, if you do fit a dial just leave a note for the mot tester that says the odometer reads in kilometers other wise he is likely to put it down as miles, it does not have to be entered as miles on the paperwork Option 2; Have an electronic chip fitted that converts the input signals into miles but get written proof of the initial km reading then the reading after the chip is connected as the reading can be clocked, what should happen is the initial km reading stays as is and then miles are added as and when used, so the reading is a mix of km & miles Option 3; Leave the dials as standard and use a GPS device for the speed Check the dates on the tyres, do not rely on the depth of remaining tread, when I got mine the tyres were 8yrs old but still had very good tread Check the rear axle bushes as they do rot/split although the mot should pick them up Check if there is a date on the battery as it might be well past it's best, the cars can sit around at the auctions for weeks, possibly months, then there is the time it takes to ship them, once the voltage drops below 10.5v the cells can get damaged beyond recovery, replacement type is a 005L minimum 65Ah You might want to disconnect the toll reader system it's either the slot on the dash or fitted elsewhere e.g. centre storage cubby, you can use the power to it for usb sockets, the aerials for it, top of windscreen, can be done away with and the wires used to pull other wires in if needed For parts and service items check Autodoc, Ebay, even Toyota sell on ebay, Febibilsteign, Blueprint, use the link for part numbers then use them as a cross reference Amayama.com3 points
-
All you need to do is input your frame number in to get your parts. CLICK HERE3 points
-
Just back from the meeting, a good turnout and it was great to arrive on site in convoy. Glad the sun came out to play. Good to meet like minded people and pick up ideas for future projects. Thanks for arranging the meeting, looking forward to the next one.3 points
-
3 points
-
I replaced with this rather nice item I bought on eBay for £14 delivered. I did have to cut a longer connecting bar (M6 threaded bar, cut to 50mm; it came with a 40mm bar which would only just have done it). I also added the washers and the nuts to secure the connecting bar length. Total time to replace was 10 mins; quick clean up down there and some liberal application of ACF50 and all looks good.3 points