Jump to content
Check your Alphards past history in Japan in detail with CarVX ×

MonsterS

Moderators
 View Profile  See their activity

  • Posts

    608

  • Joined

  • Last visited

  • Days Won

    53

 Content Type 

Everything posted by MonsterS

  1. MonsterS
    You might need to take all the cowling off the seat. Slide the seat all the ways forward and there should be some runner bolts to undo. It's been so long I've forgotten how I did it last time I had one.
  2. MonsterS
    Actually you can, but just be done via the obd2 socket using a specific code reader/writer. I'll find out and lost it here.
  3. MonsterS
    Yup corner light
  4. MonsterS
    I would remove all bolts, but that's me.
  5. MonsterS
    Nice, welcome you'll have to post images.
  6. MonsterS
    Theres a company on the isle of wight. Forgot what they are called but co e recommended highly.
  7. MonsterS
    Howide
  8. MonsterS
    Thinkk thats batteries too hot.
  9. MonsterS
    that fuse is passenger footwell under the glove box.
  10. MonsterS
    Alot of the models do not allow you to switch off the airbag now. Normally it would be as you open the passengers door on the dash if there was. But Toyota do not like this function.
  11. MonsterS
    Use this as a knowledge base. Eighseaters blog
  12. MonsterS
    Normally it's a 13mm or 15mm socket, long extension
  13. MonsterS
    I would say buy a alphard book from Amazon. Well worth the 25 quid. Toyota alphard book
  14. MonsterS
    Lane control is a button in the bottom left of the drivers side next to the steering wheel? Press it. Then when you are going over 40mph it comes on. If not check fuse box on lower left passenger footwell.
  15. MonsterS
    Not much, its because the FM does not work for the UK. I would buy a new head unit or a FM band extender.
  16. MonsterS
    120mah is fine. Just make sure you get the right sizing for the cradle
  17. MonsterS
    Yes it would.
  18. MonsterS
    No it's non standard parts. such as lowered suspension, engine bored out, non factory type exhaust i.e. bigger outlet or flames coming from exhaust. Different sized wheels than when it came out of the factory. so 19" instead of 17"
  19. MonsterS
    Yes, it's not a mod if its set at original sepcs.
  20. MonsterS
    Short answer. No because of the weight of the conversion.
  21. MonsterS
    no if its original suspension then you do not need to declare.
  22. MonsterS
    Ouch! Did you do a full reset on the hybrid first. I've not got one but there was been a thread on facebook about having to do a full ecu reset on hybrid's once the batteries go flat.
  23. MonsterS
    Hi, If i was you look for the leveling bar and see the switch/sensor and just try and give it a good clean. it could be full of debris.
  24. MonsterS
    It only works when stationary otherwise it wont show the video on and sound. on screen will have the button pending your radio model.
  25. MonsterS
    never buy without seeing it first. We made the mistake with a Merc vito. never never again. As for yellow headlights we just used tutrle wax and a drill with a polisihing clotch on the end, 20 mins later they look great then used clear laqer on the headlights.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.