Jump to content
Check your Alphards past history in Japan in detail with CarVX ×

Picasso

Moderators
  • Posts

    1,154
  • Joined

  • Last visited

  • Days Won

    85

Everything posted by Picasso

  1. Hi What's your reg no. Or vin no.
  2. drew have you tried a spare key as i dont think it will be ignition barrell because if key turns ok barrell ok transponder pick up for the key is located on th out side of the barrel have attatched a drawing also you have the ignition starter switch both parts are available can point you in right direction of sellers
  3. You could be looking at having the aircon compressor replaced or rebuilt if it turns out to be compressor pm me can point you in right direction to have rebuilt
  4. Did you buy from a dealer or private sale
  5. You need to get the ac tested as you may have a leak ac system does not cool the hybrid system
  6. Hi you profile says yours is a 3.0 not 3.5 if start motor on way out it will drain battery had similar problem get starter checked
  7. From experience try cleaning it if works for a bit buy a genuine one I put aftermarket one on it ran like a bag off bolts genuine run like a dream
  8. phil sorry yes you got the correct fuel sensor if i was you i would not bother cleaning the maf sensor i had this problem with my 3.0 alphard best route is to replace the maff sensor they not exspensive put oe no. into ebay 2220422010 maff sensor circled in red in the drawing
  9. oxegen sensor and fuel ratio sensor are 2 different sensors
  10. fuel ratio sensor is the top one at the manifold bottom one is a oxegen sensor
  11. The sensor you had replaced is not correct part no. The correct part no. Is 8954228100 so that is more likely the reason the light is still coming on the part no. You had fitted is a oxegen sensor not a fuel ratio sensor you need to get the correct part fitted
  12. Maf sensor can trigger same code air flow sensor
  13. Phil do you have the part no. Of the sensor you bought from toyota
  14. Hi might be a silly question have you turned the lights up
  15. L connector is below the battery to the right
  16. First picture showing roof moulding secound photo showing price tell me which side as 2nd photo is for driverside
  17. Which side moulding as they are handed
  18. Hi they got good taste what's your reg no. Wil, get the part no. For you
  19. if im guessing rightly this is a aftermarket android system you will need to change location settings within the radio you also may need 4g access
  20. To from what I can see from your photo looks like your alphard is lowered I have same kit and I have more clearance than yours mine was lowered and had put back to standard new shcks and springs all round £1200 just for parts then the labour cost
  21. No i don't have a campervan conversion I bought from my local motor factor's who also list on ebay
  22. When I bought my alphard 2 years ago it was lowered which I did not know I had a front shock go on it which turned out to be coil overs so I decided to everything back to standard so I had a hole new suspension fitted and had heavy duty springs fitted It now drives great handles amazing cost me £1200 just for parts best money spent
  23. You could fit heavy duty rear springs they standard height give it a harder ride
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.