Picasso

glad you sorted easy fix

Yes it's the car immobiliser should carry on flashing till you put the key in the ignition

Hello Carole are you able to upload a photo

Try Ian taylor uk Ltd he is a alphard importer I'm sure he will point you in right direction

There is a company I know that can make you a replacement they copy the original condenser for about £450 takes about 5 days if you pm me I will give you there details

Not all early alphards are ulez compliant about 2006 onwards I think

I don't own a hybrid but I know a bit about them only buy 1 2008 onwards

Why download a pdf version when you can buy a paperback version on ebay or amazon

Coil pack

The thing is you replaced it been OK now not not staring again this tells me you probably blown the fuse again but what's causing to blow I would check the fuse again and get the starter motor checked

Have you blown the starter replay fuse

You can have a canbus chip fitted which will change it to read in miles chips cost about £180.00

Yes get your dealer to sort it

Hi What's your reg no. Or vin no.

drew have you tried a spare key as i dont think it will be ignition barrell because if key turns ok barrell ok transponder pick up for the key is located on th out side of the barrel have attatched a drawing also you have the ignition starter switch both parts are available can point you in right direction of sellers

You could be looking at having the aircon compressor replaced or rebuilt if it turns out to be compressor pm me can point you in right direction to have rebuilt

Did you buy from a dealer or private sale

You need to get the ac tested as you may have a leak ac system does not cool the hybrid system

Yes send me what you have

Hi you profile says yours is a 3.0 not 3.5 if start motor on way out it will drain battery had similar problem get starter checked

Hi what's your reg no. Or vin

From experience try cleaning it if works for a bit buy a genuine one I put aftermarket one on it ran like a bag off bolts genuine run like a dream

phil sorry yes you got the correct fuel sensor if i was you i would not bother cleaning the maf sensor i had this problem with my 3.0 alphard best route is to replace the maff sensor they not exspensive put oe no. into ebay 2220422010 maff sensor circled in red in the drawing

oxegen sensor and fuel ratio sensor are 2 different sensors

fuel ratio sensor is the top one at the manifold bottom one is a oxegen sensor