MonsterS

it is. it's almost a complete strip of the front end just to get to the headlights. What are you trying to do?

2.4 has always had issues with ODB scanning. some people say use the torque pro app and get a bluetooth reader as it needs some addtional commands to work correclty.

boot left side pocket.

Drop the front bumper then there are bolts holding the headlight in to position remove them. Image

Try speaking to http://www.japcover.co.uk/home They sorted us out. and Welcome.

i've heard that it's normally for side conversions. I would suggest contacting Ben Hau (Alphard Ben) he may be able to sort that out with a suspension upgrade and TRC rewrite.

ouch! yeah its fairly expensive here in Bristol too. Though on the Isle of wight i heard its really cheap.

At the moment for Bristol it's Asda Longwell Green 114.7p

Well as the title suggests what have you been upto today? I've spent the last hour trying to find a brake fluid leak and mostly installing new servers in our datacenter for customers to use

transformers here we come Like that alot.

You able to scan the whole booklet with any wiring or ISO plug connectors We can add it to our resources section then This might help alot of people looking to change it as well.

Good Luck with the Doors, If i remember correctly from facebook post's there is a small screw on the bulkhead of the door frame which needs removing first to get the cover off.

Hi Steve, Not personally got these doors/ though on my estima (before the alphard) we had issues with the contacts in the door switches for the automatic motor. I stripped them down and used some fine sandpaper on the contacts as they just got gunged up with crap. Might be worth doing some tlc to the contacts of the handles.

Its just a bulb and as long as the bulbs allow a certian amount of light and in the right position its a MOT pass.

Thank you. How was wiring it up?

Welcome and very nice

No. I would make my own on photobox or a similar site. would be cheaper. So You are from trowbridge nice close to bristol than most members If i was you i would stick Super unleaded in your tank or convert to LPG for better mileage.

Welcome I've got the same. Reverse camera only comes on in reverse. However the front camera comes on when going slow if the steering wheel controls are pressed Any questions just ask i've got the same model so can point you in the right direction if needed.

petrol. I got 30mpg using super unleaded to the isle of wight but average 18 - 20mpg in town driving

As for the batteries, i'd get a good bluetooth scanner

We have a 3.0l v6 and get around 18 - 30 mpg fantastic vehicles. We had an estima before and this blows it out of the water. Things to consider. Find a good dealer (or import yourself) then get the following works done. Underseal Full service including (cam, water pump and filters) optional (new head unit) though i've stuck the same one as i dont see a point changing it. Otherwise they do not need much looking after and are fantastic vehicles. same engine as the RS300 lexus so mechanics can work on the them easily.

Common faults is the suspension on the campers make sure they have been setup correclty and not leaking. Welcome by the way.

Added 3L brake pads to the list.

Not bad Ian. It all changes from place to place and driver. But nice hopefully mine will drop next year instead of going up like normal

Found a supplier on ebay that does the bulbs alot cheaper than Ben can do them for. cost me £3 for a pack of 10 blue ones i've swapped all my switches and the display under the radio to these and they work a treat. ON EBAY